Adding new module

Hello All,
  We have added new module (Tracking) on our local setup through “app/public/js/modules.js” and “setup/page/modules_setup/modules_setup.js” . Today I took update and tracking module got invisible.I have added new module in “modules.js” and “module_setup.js” , rebuild the setup using “./lib/wnf.py -b” , also restarted the webserver but the changes not reflected. What should i do in order to made added module visible?

Thank you

Regards
Gangadhar kadam



You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

To post to this group, send email to er...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msg/erpnext-developer-forum/-/B8npRSjRgS0J.

For more options, visit https://groups.google.com/groups/opt_out.

 

 

Please check Setup -> Show/Hide Modules, may be it is uncheched there.

On 11 Apr 2013 18:45, "gangadhar kadam" <em...@gmail.com> wrote:
Hello All,
We have added new module (Tracking) on our local setup through "app/public/js/modules.js" and "setup/page/modules_setup/modules_setup.js" . Today I took update and tracking module got invisible.I have added new module in "modules.js" and "module_setup.js" , rebuild the setup using "./lib/wnf.py -b" , also restarted the webserver but the changes not reflected. What should i do in order to made added module visible?

Thank you

Regards
Gangadhar kadam



You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To post to this group, send email to er…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msg/erpnext-developer-forum/-/B8npRSjRgS0J.

For more options, visit https://groups.google.com/groups/opt_out.






You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

To post to this group, send email to er...@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

 

 

Hello Nabin,
Thank you for your response but new added module is also not listed in setup->Show/hide module. I have added new module in setup/page/modules_setup/modules_setup.js. I also rebuild the setup. for chrch role user i have given permission for doctypes in new module still it is hidden. What should i do?

Regards,
Gangadhar kadam


On 11 April 2013 19:33, Nabin Hait <na...@gmail.com> wrote:

Please check Setup -> Show/Hide Modules, may be it is uncheched there.

On 11 Apr 2013 18:45, "gangadhar kadam" <em...@gmail.com> wrote:

Hello All,
We have added new module (Tracking) on our local setup through "app/public/js/modules.js" and "setup/page/modules_setup/modules_setup.js" . Today I took update and tracking module got invisible.I have added new module in "modules.js" and "module_setup.js" , rebuild the setup using "./lib/wnf.py -b" , also restarted the webserver but the changes not reflected. What should i do in order to made added module visible?


Thank you

Regards
Gangadhar kadam



You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To post to this group, send email to er…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msg/erpnext-developer-forum/-/B8npRSjRgS0J.

For more options, visit https://groups.google.com/groups/opt_out.






You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To post to this group, send email to er…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.







--
Thanks & Regards,
Mr.Gangadhar N.Kadam.
Cell: +91 9960066444
Software Engineer,
New Indictrans Technologies Pvt. Ltd., Pune


P SAVE TREES - Please consider the environment before printing this email.

SAVE ENERGY - My monitor is off whenever I am away from my desk. I am helping prevent global warming by reducing consumption of power... ARE YOU?



You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

To post to this group, send email to er...@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

 

 

Add it in app/config.json

Gangadhar - can you please share your updates on GitHub? This project is a community effort and contributions should not be a one way street.


W: https://erpnext.com
T: @rushabh_mehta

On 12-Apr-2013, at 10:18 AM, गंगाधर कदम <em...@gmail.com> wrote:

Hello Nabin,
      Thank you for your response but new added module is also not listed in setup->Show/hide module. I have added new module in setup/page/modules_setup/modules_setup.js. I also rebuild the setup. for chrch role user  i have given permission for doctypes in new module still it is hidden. What should i do?

Regards,
Gangadhar kadam


On 11 April 2013 19:33, Nabin Hait <na...@gmail.com> wrote:

Please check Setup -> Show/Hide Modules, may be it is uncheched there.

On 11 Apr 2013 18:45, "gangadhar kadam" <em...@gmail.com> wrote:

Hello All,
  We have added new module (Tracking) on our local setup through “app/public/js/modules.js” and “setup/page/modules_setup/modules_setup.js” . Today I took update and tracking module got invisible.I have added new module in “modules.js” and “module_setup.js” , rebuild the setup using “./lib/wnf.py -b” , also restarted the webserver but the changes not reflected. What should i do in order to made added module visible?


Thank you

Regards
Gangadhar kadam




You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To post to this group, send email to er…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msg/erpnext-developer-forum/-/B8npRSjRgS0J.

For more options, visit https://groups.google.com/groups/opt_out.

 

 




You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To post to this group, send email to er…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

 

 




--
Thanks & Regards,
Mr.Gangadhar N.Kadam.
Cell: +91 9960066444
Software Engineer,
New Indictrans Technologies Pvt. Ltd., Pune

SAVE TREES - Please consider the environment before printing this email.
SAVE ENERGY - My monitor is off whenever I am away from my desk. I am helping  prevent global warming by reducing consumption of power... ARE YOU?



You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To post to this group, send email to er…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

 

 




You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

To post to this group, send email to er...@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

 

 

Hello Sir,
After project delivery I will fork all updated on git.

While updating i got following error.

Traceback (innermost last):
File "/var/www/mtn/lib/webnotes/modules/patch_handler.py", line 74, in execute_patch
webnotes.get_method(patchmodule + ".execute")()
File "app/patches/march_2013/p04_pos_update_stock_check.py", line 5, in execute
webnotes.reload_doc("setup", "doctype", "global_defaults")
File "/var/www/mtn/lib/webnotes/__init__.py", line 339, in reload_doc
File "/var/www/mtn/lib/webnotes/modules/__init__.py", line 73, in reload_doc
return import_files(module, dt, dn, force)
File "/var/www/mtn/lib/webnotes/modules/import_file.py", line 35, in import_files
return import_file(module, dt, dn, force)
File "/var/www/mtn/lib/webnotes/modules/import_file.py", line 45, in import_file
ret = import_file_by_path(path, force)
File "/var/www/mtn/lib/webnotes/modules/import_file.py", line 63, in import_file_by_path
import_doclist(doclist)
File "/var/www/mtn/lib/webnotes/modules/import_file.py", line 92, in import_doclist
webnotes.delete_doc(doctype, name, force=1, ignore_doctypes =ignore, for_reload=True)
TypeError: delete_doc() got an unexpected keyword argument 'ignore_doctypes'

What should i do?

Thanks and regards,
Gangadhar kadam


On 12 April 2013 10:21, Rushabh Mehta <rm...@gmail.com> wrote:
Add it in app/config.json

Gangadhar - can you please share your updates on GitHub? This project is a community effort and contributions should not be a one way street.


W: https://erpnext.com
T: @rushabh_mehta

On 12-Apr-2013, at 10:18 AM, गंगाधर कदम <em...@gmail.com> wrote:

Hello Nabin,
Thank you for your response but new added module is also not listed in setup->Show/hide module. I have added new module in setup/page/modules_setup/modules_setup.js. I also rebuild the setup. for chrch role user i have given permission for doctypes in new module still it is hidden. What should i do?


Regards,
Gangadhar kadam


On 11 April 2013 19:33, Nabin Hait <na…@gmail.com> wrote:

Please check Setup -> Show/Hide Modules, may be it is uncheched there.

On 11 Apr 2013 18:45, "gangadhar kadam" <em...@gmail.com> wrote:

Hello All,
We have added new module (Tracking) on our local setup through "app/public/js/modules.js" and "setup/page/modules_setup/modules_setup.js" . Today I took update and tracking module got invisible.I have added new module in "modules.js" and "module_setup.js" , rebuild the setup using "./lib/wnf.py -b" , also restarted the webserver but the changes not reflected. What should i do in order to made added module visible?


Thank you

Regards
Gangadhar kadam




You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To post to this group, send email to er…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msg/erpnext-developer-forum/-/B8npRSjRgS0J.

For more options, visit https://groups.google.com/groups/opt_out.







You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To post to this group, send email to er…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.







--
Thanks & Regards,
Mr.Gangadhar N.Kadam.
Cell: +91 9960066444
Software Engineer,
New Indictrans Technologies Pvt. Ltd., Pune

P SAVE TREES - Please consider the environment before printing this email.
SAVE ENERGY - My monitor is off whenever I am away from my desk. I am helping prevent global warming by reducing consumption of power... ARE YOU?



You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To post to this group, send email to er…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.







You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To post to this group, send email to er…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.







--
Thanks & Regards,
Mr.Gangadhar N.Kadam.
Cell: +91 9960066444
Software Engineer,
New Indictrans Technologies Pvt. Ltd., Pune


P SAVE TREES - Please consider the environment before printing this email.

SAVE ENERGY - My monitor is off whenever I am away from my desk. I am helping prevent global warming by reducing consumption of power... ARE YOU?



You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

To post to this group, send email to er...@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

 

 

It takes < 5 mins to push updates.

Sorry Gangadhar we cannot help you further.


On Fri, Apr 12, 2013 at 2:59 PM, गंगाधर कदम <em...@gmail.com> wrote:
Hello Sir,
After project delivery I will fork all updated on git.

While updating i got following error.

Traceback (innermost last):
File "/var/www/mtn/lib/webnotes/modules/patch_handler.py", line 74, in execute_patch
webnotes.get_method(patchmodule + ".execute")()
File "app/patches/march_2013/p04_pos_update_stock_check.py", line 5, in execute
webnotes.reload_doc("setup", "doctype", "global_defaults")

File "/var/www/mtn/lib/webnotes/init.py", line 339, in reload_doc
File "/var/www/mtn/lib/webnotes/modules/init.py", line 73, in reload_doc
return import_files(module, dt, dn, force)

File "/var/www/mtn/lib/webnotes/modules/import_file.py", line 35, in import_files
return import_file(module, dt, dn, force)
File "/var/www/mtn/lib/webnotes/modules/import_file.py", line 45, in import_file

ret = import_file_by_path(path, force)<br>  File &quot;/var/www/mtn/lib/webnotes/modules/import_file.py&quot;, line 63, in import_file_by_path<br>    import_doclist(doclist)<br>  File &quot;/var/www/mtn/lib/webnotes/modules/import_file.py&quot;, line 92, in import_doclist<br>

webnotes.delete_doc(doctype, name, force=1, ignore_doctypes =ignore, for_reload=True)<br> TypeError: delete_doc() got an unexpected keyword argument &#39;ignore_doctypes&#39;<br></div><br></div>What should i do?<br><br>
Thanks and regards,
Gangadhar kadam


On 12 April 2013 10:21, Rushabh Mehta <rm...@gmail.com> wrote:
Add it in app/config.json

Gangadhar - can you please share your updates on GitHub? This project is a community effort and contributions should not be a one way street.

On 12-Apr-2013, at 10:18 AM, गंगाधर कदम <em...@gmail.com> wrote:

Hello Nabin,
  Thank you for your response but new added module is also not listed in setup-&gt;Show/hide module. I have added new module in setup/page/modules_setup/modules_setup.js. I also rebuild the setup. for chrch role user  i have given permission for doctypes in new module still it is hidden. What should i do?<br>


Regards,
Gangadhar kadam


On 11 April 2013 19:33, Nabin Hait <na…@gmail.com> wrote:

Please check Setup -> Show/Hide Modules, may be it is uncheched there.

On 11 Apr 2013 18:45, "gangadhar kadam" <em...@gmail.com> wrote:

Hello All,
We have added new module (Tracking) on our local setup through "app/public/js/modules.js" and "setup/page/modules_setup/modules_setup.js" . Today I took update and tracking module got invisible.I have added new module in "modules.js" and "module_setup.js" , rebuild the setup using "./lib/wnf.py -b" , also restarted the webserver but the changes not reflected. What should i do in order to made added module visible?


Thank you

Regards
Gangadhar kadam




You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To post to this group, send email to er…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msg/erpnext-developer-forum/-/B8npRSjRgS0J.

For more options, visit https://groups.google.com/groups/opt_out.







You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To post to this group, send email to er…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.







--
Thanks & Regards,
Mr.Gangadhar N.Kadam.
Cell: +91 9960066444
Software Engineer,
New Indictrans Technologies Pvt. Ltd., Pune

P SAVE TREES - Please consider the environment before printing this email.
SAVE ENERGY - My monitor is off whenever I am away from my desk. I am helping prevent global warming by reducing consumption of power... ARE YOU?



You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To post to this group, send email to er…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.







You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To post to this group, send email to er…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.







--
Thanks & Regards,
Mr.Gangadhar N.Kadam.
Cell: +91 9960066444
Software Engineer,
New Indictrans Technologies Pvt. Ltd., Pune


P SAVE TREES - Please consider the environment before printing this email.

SAVE ENERGY - My monitor is off whenever I am away from my desk. I am helping prevent global warming by reducing consumption of power... ARE YOU?



You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To post to this group, send email to er…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.







--



Twitter: @rushabh_mehta



You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

To post to this group, send email to er...@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

 

 

Hi rushabh,

Please, I need to try starting a new module to manage hospitals but I can not find any tutorial or topic for module creation steps as I found in openerp as an example.

Is erpnext already have one ?

I think it will be very helpfull if you and erpnext team telling us the steps in clear way.

Thank you



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.

     

     
Mohamed,

Thats a big task.... Can you make it more motivating :)

best,
Rushabh

Hi rushabh,

Please, I need to try starting a new module to manage hospitals but I can not find any tutorial or topic for module creation steps as I found in openerp as an example.

Is erpnext already have one ?

I think it will be very helpfull if you and erpnext team telling us the steps in clear way.

Thank you



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.

     

     



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.

     

     

Dear Rushabh,

I just need to make a new title like HR in modules list.

I tried to do this with ERPNext app but I can not.

I am tring to get some explanation for how to do this simply ?? !!

thanks.



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.

     

     
https://github.com/webnotes/erpnext/blob/master/config.json


T: @rushabh_mehta

On 06-Aug-2013, at 6:35 PM, Mohamed Helmy <mh...@vieracom.com> wrote:

Dear Rushabh,

I just need to make a new title like HR in modules list.

I tried to do this with ERPNext app but I can not.

I am tring to get some explanation for how to do this simply ?? !!

thanks.



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.

     

     



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.

     

     
1 Like
I'm try to add a new module too, but the adition of module record in config.json, does not show the module, on Desktop and the module_setup
There would be some more step to be done?

PS: I performed wn.py --build before this post, but does not works

Em terça-feira, 6 de agosto de 2013 10h10min41s UTC-3, rushabh escreveu:
https://github.com/webnotes/erpnext/blob/master/config.json


T: @rushabh_mehta

On 06-Aug-2013, at 6:35 PM, Mohamed Helmy <mh...@vieracom.com> wrote:

Dear Rushabh,

I just need to make a new title like HR in modules list.

I tried to do this with ERPNext app but I can not.

I am tring to get some explanation for how to do this simply ?? !!

thanks.



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.

     

     



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
Go to setup / show hide modules and check show for your module. 

Sent from my phone

On 30-Aug-2013, at 9:20 PM, Maxwell <ma...@gmail.com> wrote:

I'm try to add a new module too, but the adition of module record in config.json, does not show the module, on Desktop and the module_setup
There would be some more step to be done?

PS: I performed wn.py --build before this post, but does not works

Em terça-feira, 6 de agosto de 2013 10h10min41s UTC-3, rushabh escreveu:
https://github.com/webnotes/erpnext/blob/master/config.json


T: @rushabh_mehta

On 06-Aug-2013, at 6:35 PM, Mohamed Helmy <mh...@vieracom.com> wrote:

Dear Rushabh,

I just need to make a new title like HR in modules list.

I tried to do this with ERPNext app but I can not.

I am tring to get some explanation for how to do this simply ?? !!

thanks.



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.

     

     



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
The module is not being displayed.
My config.js is attached



2013/8/30 Anand Doshi <an...@iwebnotes.com>
Go to setup / show hide modules and check show for your module.

Sent from my phone

On 30-Aug-2013, at 9:20 PM, Maxwell <ma...@gmail.com> wrote:

I'm try to add a new module too, but the adition of module record in config.json, does not show the module, on Desktop and the module_setup
There would be some more step to be done?

PS: I performed wn.py --build before this post, but does not works

Em terça-feira, 6 de agosto de 2013 10h10min41s UTC-3, rushabh escreveu:
https://github.com/webnotes/erpnext/blob/master/config.json

On 06-Aug-2013, at 6:35 PM, Mohamed Helmy <mh...@vieracom.com> wrote:

Dear Rushabh,

I just need to make a new title like HR in modules list.

I tried to do this with ERPNext app but I can not.


I am tring to get some explanation for how to do this simply ?? !!

thanks.




Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.







Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.



Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




--

Maxwell Morais
Tecnologia da Informação
+55 11 3931-1412 Ramal 31

www.realizemodulados.com.br



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
Check

wn.modules

and 

wn.user.get_desktop_items()

from the js console and see if your module appears in both.

You may also have to give permissions on the page, module def related to the module

- Rushabh


W: https://erpnext.com
T: @rushabh_mehta

On 31-Aug-2013, at 1:11 AM, Maxwell Morais <ma...@gmail.com> wrote:

The module is not being displayed.
 My config.js is attached



2013/8/30 Anand Doshi <an...@iwebnotes.com>
Go to setup / show hide modules and check show for your module. 

Sent from my phone

On 30-Aug-2013, at 9:20 PM, Maxwell <ma...@gmail.com> wrote:

I'm try to add a new module too, but the adition of module record in config.json, does not show the module, on Desktop and the module_setup
There would be some more step to be done?

PS: I performed wn.py --build before this post, but does not works

Em terça-feira, 6 de agosto de 2013 10h10min41s UTC-3, rushabh escreveu:
https://github.com/webnotes/erpnext/blob/master/config.json

On 06-Aug-2013, at 6:35 PM, Mohamed Helmy <mh...@vieracom.com> wrote:

Dear Rushabh,

I just need to make a new title like HR in modules list.

I tried to do this with ERPNext app but I can not.


I am tring to get some explanation for how to do this simply ?? !!

thanks.




Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.

     

     




Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




--

Maxwell Morais
Tecnologia da Informação
+55 11 3931-1412 Ramal 31

 www.realizemodulados.com.br




Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.

    <config.json>



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
After recreate the page, the module is showed in module def, the page is accessible by url, but not displayed on the desktop.

The module def is `Call Center` and its exists on `wn.modules"` but not is listed on `wn.user.get_desktop_items()`
The permission of the page is `All`




2013/8/31 Rushabh Mehta <rm…@gmail.com>

Check

wn.modules

and

wn.user.get_desktop_items()

from the js console and see if your module appears in both.

You may also have to give permissions on the page, module def related to the module

- Rushabh



W: https://erpnext.com
T: @rushabh_mehta

On 31-Aug-2013, at 1:11 AM, Maxwell Morais <ma...@gmail.com> wrote:

The module is not being displayed.

My config.js is attached




2013/8/30 Anand Doshi <an...@iwebnotes.com>
Go to setup / show hide modules and check show for your module.

Sent from my phone

On 30-Aug-2013, at 9:20 PM, Maxwell <ma...@gmail.com> wrote:

I'm try to add a new module too, but the adition of module record in config.json, does not show the module, on Desktop and the module_setup
There would be some more step to be done?

PS: I performed wn.py --build before this post, but does not works

Em terça-feira, 6 de agosto de 2013 10h10min41s UTC-3, rushabh escreveu:
https://github.com/webnotes/erpnext/blob/master/config.json

On 06-Aug-2013, at 6:35 PM, Mohamed Helmy <mh...@vieracom.com> wrote:

Dear Rushabh,

I just need to make a new title like HR in modules list.

I tried to do this with ERPNext app but I can not.


I am tring to get some explanation for how to do this simply ?? !!

thanks.




Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.








Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




--

Maxwell Morais
Tecnologia da Informação




Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

<config.json>



Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




--

Maxwell Morais
Tecnologia da Informação
+55 11 3931-1412 Ramal 31

www.realizemodulados.com.br



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.

From what I could contain the problem occurs because the module is not listed in wn.boot.profile.allow_modules, someone would have some idea about how to solve?

If I force the input module in wn.boot.profile.allow_modules it is listed on the desktop.



2013/9/2 Maxwell Morais <ma...@gmail.com>
After recreate the page, the module is showed in module def, the page is accessible by url, but not displayed on the desktop.

The module def is `Call Center` and its exists on `wn.modules"` but not is listed on `wn.user.get_desktop_items()`
The permission of the page is `All`




2013/8/31 Rushabh Mehta <rm…@gmail.com>

Check

wn.modules

and

wn.user.get_desktop_items()

from the js console and see if your module appears in both.

You may also have to give permissions on the page, module def related to the module

- Rushabh



W: https://erpnext.com
T: @rushabh_mehta

On 31-Aug-2013, at 1:11 AM, Maxwell Morais <ma...@gmail.com> wrote:

The module is not being displayed.

My config.js is attached




2013/8/30 Anand Doshi <an...@iwebnotes.com>
Go to setup / show hide modules and check show for your module.

Sent from my phone

On 30-Aug-2013, at 9:20 PM, Maxwell <ma...@gmail.com> wrote:

I'm try to add a new module too, but the adition of module record in config.json, does not show the module, on Desktop and the module_setup
There would be some more step to be done?

PS: I performed wn.py --build before this post, but does not works

Em terça-feira, 6 de agosto de 2013 10h10min41s UTC-3, rushabh escreveu:
https://github.com/webnotes/erpnext/blob/master/config.json

On 06-Aug-2013, at 6:35 PM, Mohamed Helmy <mh...@vieracom.com> wrote:

Dear Rushabh,

I just need to make a new title like HR in modules list.

I tried to do this with ERPNext app but I can not.


I am tring to get some explanation for how to do this simply ?? !!

thanks.




Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.








Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




--

Maxwell Morais
Tecnologia da Informação




Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

<config.json>



Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




--

Maxwell Morais
Tecnologia da Informação




--

Maxwell Morais
Tecnologia da Informação
+55 11 3931-1412 Ramal 31

www.realizemodulados.com.br



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
You have to set "type" as "page" in config.json



On 02-Sep-2013, at 4:46 PM, Maxwell Morais <ma...@gmail.com> wrote:

From what I could contain the problem occurs because the module is not listed in wn.boot.profile.allow_modules, someone would have some idea about how to solve?

If I force the input module in wn.boot.profile.allow_modules it is listed on the desktop.



2013/9/2 Maxwell Morais <ma...@gmail.com>
After recreate the page, the module is showed in module def, the page is accessible by url, but not displayed on the desktop.

The module def is `Call Center` and its exists on `wn.modules"` but not is listed on `wn.user.get_desktop_items()`
The permission of the page is `All`




2013/8/31 Rushabh Mehta <rm…@gmail.com>

Check

wn.modules

and 

wn.user.get_desktop_items()

from the js console and see if your module appears in both.

You may also have to give permissions on the page, module def related to the module

- Rushabh



W: https://erpnext.com
T: @rushabh_mehta

On 31-Aug-2013, at 1:11 AM, Maxwell Morais <ma...@gmail.com> wrote:

The module is not being displayed.

 My config.js is attached




2013/8/30 Anand Doshi <an...@iwebnotes.com>
Go to setup / show hide modules and check show for your module. 

Sent from my phone

On 30-Aug-2013, at 9:20 PM, Maxwell <ma...@gmail.com> wrote:

I'm try to add a new module too, but the adition of module record in config.json, does not show the module, on Desktop and the module_setup
There would be some more step to be done?

PS: I performed wn.py --build before this post, but does not works

Em terça-feira, 6 de agosto de 2013 10h10min41s UTC-3, rushabh escreveu:
https://github.com/webnotes/erpnext/blob/master/config.json

On 06-Aug-2013, at 6:35 PM, Mohamed Helmy <mh...@vieracom.com> wrote:

Dear Rushabh,

I just need to make a new title like HR in modules list.

I tried to do this with ERPNext app but I can not.


I am tring to get some explanation for how to do this simply ?? !!

thanks.




Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.

     

     




Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




--

Maxwell Morais
Tecnologia da Informação




Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

<config.json>




Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




--

Maxwell Morais
Tecnologia da Informação




--

Maxwell Morais
Tecnologia da Informação
+55 11 3931-1412 Ramal 31

 www.realizemodulados.com.br




Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
Works Fine, thanks!


2013/9/3 Rushabh Mehta <rm...@gmail.com>
You have to set "type" as "page" in config.json



On 02-Sep-2013, at 4:46 PM, Maxwell Morais <ma...@gmail.com> wrote:

From what I could contain the problem occurs because the module is not listed in wn.boot.profile.allow_modules, someone would have some idea about how to solve?

If I force the input module in wn.boot.profile.allow_modules it is listed on the desktop.



2013/9/2 Maxwell Morais <ma...@gmail.com>
After recreate the page, the module is showed in module def, the page is accessible by url, but not displayed on the desktop.

The module def is `Call Center` and its exists on `wn.modules"` but not is listed on `wn.user.get_desktop_items()`
The permission of the page is `All`




2013/8/31 Rushabh Mehta <rm…@gmail.com>

Check

wn.modules

and

wn.user.get_desktop_items()

from the js console and see if your module appears in both.

You may also have to give permissions on the page, module def related to the module

- Rushabh



W: https://erpnext.com
T: @rushabh_mehta

On 31-Aug-2013, at 1:11 AM, Maxwell Morais <ma...@gmail.com> wrote:

The module is not being displayed.

My config.js is attached




2013/8/30 Anand Doshi <an...@iwebnotes.com>
Go to setup / show hide modules and check show for your module.

Sent from my phone

On 30-Aug-2013, at 9:20 PM, Maxwell <ma...@gmail.com> wrote:

I'm try to add a new module too, but the adition of module record in config.json, does not show the module, on Desktop and the module_setup
There would be some more step to be done?

PS: I performed wn.py --build before this post, but does not works

Em terça-feira, 6 de agosto de 2013 10h10min41s UTC-3, rushabh escreveu:
https://github.com/webnotes/erpnext/blob/master/config.json

On 06-Aug-2013, at 6:35 PM, Mohamed Helmy <mh...@vieracom.com> wrote:

Dear Rushabh,

I just need to make a new title like HR in modules list.

I tried to do this with ERPNext app but I can not.


I am tring to get some explanation for how to do this simply ?? !!

thanks.




Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.








Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




--

Maxwell Morais
Tecnologia da Informação




Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

<config.json>




Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




--

Maxwell Morais
Tecnologia da Informação




--

Maxwell Morais
Tecnologia da Informação




Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




--

Maxwell Morais
Tecnologia da Informação
+55 11 3931-1412 Ramal 31

www.realizemodulados.com.br



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
Does it have to be type=page? I tested it with type=module and it works too.

Also I found that if you have type=module then you can't have module name with space in it. For example, if you have module name as "Food Management" and type='module' then it won't get displayed. wn.boot.profile.allowed_modules.indexOf("Food Management") return -1 even though "Food Management" is in allowed_modules. If rename it to FoodMan it works.

On Tuesday, 3 September 2013 06:23:37 UTC+1, rushabh wrote:
You have to set "type" as "page" in config.json



On 02-Sep-2013, at 4:46 PM, Maxwell Morais <ma...@gmail.com> wrote:

From what I could contain the problem occurs because the module is not listed in wn.boot.profile.allow_modules, someone would have some idea about how to solve?

If I force the input module in wn.boot.profile.allow_modules it is listed on the desktop.



2013/9/2 Maxwell Morais <ma...@gmail.com>
After recreate the page, the module is showed in module def, the page is accessible by url, but not displayed on the desktop.

The module def is `Call Center` and its exists on `wn.modules"` but not is listed on `wn.user.get_desktop_items()`
The permission of the page is `All`




2013/8/31 Rushabh Mehta <rm…@gmail.com>

Check

wn.modules

and 

wn.user.get_desktop_items()

from the js console and see if your module appears in both.

You may also have to give permissions on the page, module def related to the module

- Rushabh



W: https://erpnext.com
T: @rushabh_mehta

On 31-Aug-2013, at 1:11 AM, Maxwell Morais <ma...@gmail.com> wrote:

The module is not being displayed.

 My config.js is attached




2013/8/30 Anand Doshi <an...@iwebnotes.com>
Go to setup / show hide modules and check show for your module. 

Sent from my phone

On 30-Aug-2013, at 9:20 PM, Maxwell <ma...@gmail.com> wrote:

I'm try to add a new module too, but the adition of module record in config.json, does not show the module, on Desktop and the module_setup
There would be some more step to be done?

PS: I performed wn.py --build before this post, but does not works

Em terça-feira, 6 de agosto de 2013 10h10min41s UTC-3, rushabh escreveu:
https://github.com/webnotes/erpnext/blob/master/config.json

On 06-Aug-2013, at 6:35 PM, Mohamed Helmy <mh...@vieracom.com> wrote:

Dear Rushabh,

I just need to make a new title like HR in modules list.

I tried to do this with ERPNext app but I can not.


I am tring to get some explanation for how to do this simply ?? !!

thanks.




Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+unsubscr…@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.

     

     




Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




--

Maxwell Morais
Tecnologia da Informação




Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

<config.json>




Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




--

Maxwell Morais
Tecnologia da Informação




--

Maxwell Morais
Tecnologia da Informação
+55 11 3931-1412 Ramal 31

 www.realizemodulados.com.br




Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
If you own doctypes linked to the module, it worked, but in my case I did not.


2013/9/11 MP <ma…@gmail.com>

Does it have to be type=page? I tested it with type=module and it works too.

Also I found that if you have type=module then you can't have module name with space in it. For example, if you have module name as "Food Management" and type='module' then it won't get displayed. wn.boot.profile.allowed_modules.indexOf("Food Management") return -1 even though "Food Management" is in allowed_modules. If rename it to FoodMan it works.


On Tuesday, 3 September 2013 06:23:37 UTC+1, rushabh wrote:

You have to set "type" as "page" in config.json





On 02-Sep-2013, at 4:46 PM, Maxwell Morais <ma…@gmail.com> wrote:

From what I could contain the problem occurs because the module is not listed in wn.boot.profile.allow_modules, someone would have some idea about how to solve?

If I force the input module in wn.boot.profile.allow_modules it is listed on the desktop.



2013/9/2 Maxwell Morais <ma...@gmail.com>
After recreate the page, the module is showed in module def, the page is accessible by url, but not displayed on the desktop.

The module def is `Call Center` and its exists on `wn.modules"` but not is listed on `wn.user.get_desktop_items()`
The permission of the page is `All`




2013/8/31 Rushabh Mehta <rm…@gmail.com>

Check

wn.modules

and

wn.user.get_desktop_items()

from the js console and see if your module appears in both.

You may also have to give permissions on the page, module def related to the module

- Rushabh



W: https://erpnext.com
T: @rushabh_mehta

On 31-Aug-2013, at 1:11 AM, Maxwell Morais <ma...@gmail.com> wrote:

The module is not being displayed.

My config.js is attached




2013/8/30 Anand Doshi <an...@iwebnotes.com>
Go to setup / show hide modules and check show for your module.

Sent from my phone

On 30-Aug-2013, at 9:20 PM, Maxwell <ma...@gmail.com> wrote:

I'm try to add a new module too, but the adition of module record in config.json, does not show the module, on Desktop and the module_setup
There would be some more step to be done?

PS: I performed wn.py --build before this post, but does not works

Em terça-feira, 6 de agosto de 2013 10h10min41s UTC-3, rushabh escreveu:
https://github.com/webnotes/erpnext/blob/master/config.json

On 06-Aug-2013, at 6:35 PM, Mohamed Helmy <mh...@vieracom.com> wrote:

Dear Rushabh,

I just need to make a new title like HR in modules list.

I tried to do this with ERPNext app but I can not.


I am tring to get some explanation for how to do this simply ?? !!

thanks.




Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+unsubscr…@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.








Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




--

Maxwell Morais
Tecnologia da Informação




Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

<config.json>




Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




--

Maxwell Morais
Tecnologia da Informação




--

Maxwell Morais
Tecnologia da Informação




Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.



Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




--

Maxwell Morais
Tecnologia da Informação
+55 11 3931-1412 Ramal 31

www.realizemodulados.com.br



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.