I have made the changes
mail_login = None
mail_password = None
The parse errors are gone but i still get this error when tring to create a user. Also my ERPNext system still does not seem to send email.
Traceback (innermost last):
File "../lib/py/webnotes/handler.py", line 184, in handle
execute_cmd(cmd)
File "../lib/py/webnotes/handler.py", line 217, in execute_cmd
ret = method(webnotes.form_dict.get('arg'))
File "/var/www/erpnext/erpnext/utilities/page/users/users.py", line 101, in add_user
add_profile(args)
File "/var/www/erpnext/erpnext/utilities/page/users/users.py", line 152, in add_profile
send_welcome_mail(email, args)
File "/var/www/erpnext/erpnext/utilities/page/users/users.py", line 166, in send_welcome_mail
sendmail_md(pr.email, subject="Welcome to ERPNext", msg=welcome_txt % args, from_defs=1)
File "../lib/py/webnotes/utils/email_lib/__init__.py", line 47, in sendmail_md
sendmail(recipients, sender, markdown2.markdown(msg), subject, txt=msg, from_defs=from_defs)
File "../lib/py/webnotes/utils/email_lib/__init__.py", line 85, in sendmail
email.send(send_now)
File "../lib/py/webnotes/utils/email_lib/send.py", line 220, in send
sess = self.smtp_connect()
File "../lib/py/webnotes/utils/email_lib/send.py", line 244, in smtp_connect
ret = sess.login(self.login, self.password)
File "/usr/lib/python2.6/smtplib.py", line 552, in login
raise SMTPException("SMTP AUTH extension not supported by server.")
SMTPException: SMTP AUTH extension not supported by server.
On May 24, 2012 8:57 PM, "Rushabh Mehta" <
rm...@gmail.com> wrote:
Hi Ryan,
I think your smtp server may not need authentication. Set
mail_login = None
mail_password = None
and try again
- Rushabh
On 24-May-2012, at 11:29 PM, RYAN vAN GINNEKEN wrote:
Hello again and thanks again for the help as suggested i have placed all my email variables within the conf.py in single qoutes and set ssl = to 0. Now i do not get the parse errors anymore but still get the error below when i try to add a user.
Also still do not recive any emails I send using the ERPNext system…however i just checked and i cannot send mail from localhost on this system to anywhere either. Therefore it might be something i need to look into on my end for sending email just tying to figure out how to test an external server setup like ERPNext uses.
Anyways here is the error u requested
Traceback (innermost last):
File "…/lib/py/webnotes/handler.py", line 184, in handle
execute_cmd(cmd)
File "…/lib/py/webnotes/handler.py", line 217, in execute_cmd
ret = method(webnotes.form_dict.get('arg'))
File "/var/www/erpnext/erpnext/utilities/page/users/users.py", line 101, in add_user
add_profile(args)
File "/var/www/erpnext/erpnext/utilities/page/users/users.py", line 152, in add_profile
send_welcome_mail(email, args)<br> File "/var/www/erpnext/erpnext/utilities/page/users/users.py", line 166, in send_welcome_mail<br> sendmail_md(pr.email, subject="Welcome to ERPNext", msg=welcome_txt % args, from_defs=1)<br>
File "…/lib/py/webnotes/utils/email_lib/init.py", line 47, in sendmail_md
sendmail(recipients, sender, markdown2.markdown(msg), subject, txt=msg, from_defs=from_defs)
File "…/lib/py/webnotes/utils/email_lib/init.py", line 85, in sendmail
email.send(send_now)<br> File "../lib/py/webnotes/utils/email_lib/send.py", line 220, in send<br> sess = self.smtp_connect()<br> File "../lib/py/webnotes/utils/email_lib/send.py", line 244, in smtp_connect<br>
ret = sess.login(self.login, self.password)<br> File "/usr/lib/python2.6/smtplib.py", line 552, in login<br> raise SMTPException("SMTP AUTH extension not supported by server.")<br> SMTPException: SMTP AUTH extension not supported by server.<br>
ps my conf.py looks like this now
# outgoing mail settings
mail_server = '10.0.0.102'
mail_login = 'fa…@fake.fake'
mail_password = 'fakepassword'
mail_port = 25
use_ssl = 0
On Wed, May 23, 2012 at 7:09 PM, Rushabh Mehta
<rm…@gmail.com> wrote:
Hi Ryan, can you paste the exact error?
Sent from mobile
I have tried to set it in the conf.py see below as i am using pretty recent code however i always get Unable to complete request: parsererror. I have managed to get the same email settings to stick in the web interface now. However i still cannot seem to make NEXTERP send out emails please help
# outgoing mail settings
mail_server = 10.0.0.102
mail_login = fa…@fake.com
mail_password = fakepassword
mail_port = 25
use_ssl = No
PS i alway have to change everything back to None in the conf.py to get things working again
On Fri, May 18, 2012 at 11:16 PM, Rushabh Mehta
<rm…@gmail.com> wrote:
Hi Ryan,
You need to set it in the conf.py file in the main folder if you are using the latest code. If your system is slightly older, you will need to set it in lib/py/webnotes/defs.py
Also check that your SMTP settings are correct. If your smtp server is local and does not need any authentication, you might have to comment out the login calls in lib/py/webnotes/utils/email_lib/send.py. I think the changes were pushed only recently.
thanks,
Rushabh
On 19-May-2012, at 1:16 AM, RYAN vAN GINNEKEN wrote:
I have tried using the graphical user interface settings )) e-mail setup as it asks for the same information however I get errors is there too
On May 18, 2012 1:42 PM, "RYAN vAN GINNEKEN" <
ry...@gmail.com> wrote:
How do I do that?
On May 18, 2012 1:42 PM, "Mitul Limbani" <
mi...@enterux.in> wrote:
Rushabh,
I believe this requires to unset the variable which is hardcoded somewhere in code, which uses the defs.py by default ?
Regards,
Mitul Limbani,
Chief Architech & Founder,
Enterux Solutions Pvt. Ltd.
110 Reena Complex, Opp. Nathani Steel,
Vidyavihar (W), Mumbai - 400 086. India
http://www.enterux.com/
http://www.entvoice.com/
email: mi…@enterux.in
DID: +91-22-61447605
Cell: +91-9820332422
On Sat, May 19, 2012 at 1:00 AM, Computer King
<ry…@gmail.com> wrote:
Ok i have tried a bunch of variables for these setting and i cannot get any of them to work example my email server mx1.myserver.com my local email server 10.0.0.102 all with correct logins and passwords all give me
unable to complete request: parse error
I have even tried blanking out the default None values with blanks as suggested in this thread but still get the above error
Not sure what i am doing wrong here
On Wednesday, May 16, 2012 6:35:55 PM UTC-6, Computer King wrote:
I am having the same issue where is the defs.py i cannot find it.
Re: [erpnext-user-forum] Adding Users Throws error
Hi,
Please specify the following in defs.py file:
mail_server =
mail_port =
mail_login =
mail_password =
use_ssl =
This should solve your problem.
Also, please post technical queries on the technical forum:
wn…@googlegroups.com
Thanks,
Anand.
On Wednesday, May 16, 2012 6:35:55 PM UTC-6, Computer King wrote:
I am having the same issue where is the defs.py i cannot find it.
Re: [erpnext-user-forum] Adding Users Throws error
Hi,
Please specify the following in defs.py file:
mail_server =
mail_port =
mail_login =
mail_password =
use_ssl =
This should solve your problem.
Also, please post technical queries on the technical forum:
wn...@googlegroups.com
Thanks,
Anand.
On Wednesday, May 16, 2012 6:35:55 PM UTC-6, Computer King wrote:
I am having the same issue where is the defs.py i cannot find it.
Re: [erpnext-user-forum] Adding Users Throws error
Hi,
Please specify the following in defs.py file:
mail_server =
mail_port =
mail_login =
mail_password =
use_ssl =
This should solve your problem.
Also, please post technical queries on the technical forum:
wn...@googlegroups.com
Thanks,
Anand.
–
You received this message because you are subscribed to the Google Groups "ERPNext Technical Forum" group.
To view this discussion on the web visit https://groups.google.com/d/msg/wnframework/-/jCVT2O8Uww4J.
–
You received this message because you are subscribed to the Google Groups "ERPNext Technical Forum" group.
To post to this group, send email to wn…@googlegroups.com.
To unsubscribe from this group, send email to wnframework+un…@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/wnframework?hl=en.
–
You received this message because you are subscribed to the Google Groups "ERPNext Technical Forum" group.
To post to this group, send email to wn…@googlegroups.com.
To unsubscribe from this group, send email to wnframework+un…@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/wnframework?hl=en.
–
You received this message because you are subscribed to the Google Groups "ERPNext Technical Forum" group.
To post to this group, send email to wn…@googlegroups.com.
To unsubscribe from this group, send email to wnframework+un…@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/wnframework?hl=en.
–
You received this message because you are subscribed to the Google Groups "ERPNext Technical Forum" group.
To post to this group, send email to wn…@googlegroups.com.
To unsubscribe from this group, send email to wnframework+un…@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/wnframework?hl=en.
–
You received this message because you are subscribed to the Google Groups "ERPNext Technical Forum" group.
To post to this group, send email to wn…@googlegroups.com.
To unsubscribe from this group, send email to wnframework+un…@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/wnframework?hl=en.