ERPNEXT Customization error

Frappe Framework Bug
1

Team,

I am facing error while trying to create new form in ERPNEXT

http://dpaste.com/0251XC3

Regards
Manish

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this forum by a team (Not Found). So please consider donating if you find this forum useful (Not Found). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note

You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDfvchZKfZPuQsh4tE6WJCEh%2BirWuniGV6F%3D09mH6bum29Q%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

2


On 15-Aug-2014, at 5:41 pm, Manish Shah <sh...@gmail.com> wrote:

Team,

I am facing error while trying to create new form in ERPNEXT

http://dpaste.com/0251XC3

There is an error in your json syntax of your site_config.json

Read the trace!


Regards
Manish

--
Note:

If you are posting an issue,

1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note
---
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDfvchZKfZPuQsh4tE6WJCEh%2BirWuniGV6F%3D09mH6bum29Q%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/06B97FD2-5F8F-4150-8A9F-8D44752DAA28%40gmail.com.

    For more options, visit https://groups.google.com/d/optout.
3

Hi Rushabh,

Thanks for your response, I was able to fix this. Now, I am facing new
error. This is happening when I try to create new form with only one
field of data type text. Refer to the url for tracelog

http://dpaste.com/2SMAG5M

Regards
Manish

On 8/15/14, Rushabh Mehta rm...@gmail.com wrote:

On 15-Aug-2014, at 5:41 pm, Manish Shah sh...@gmail.com wrote:

Team,

I am facing error while trying to create new form in ERPNEXT

http://dpaste.com/0251XC3

There is an error in your json syntax of your site_config.json

Read the trace!

Regards
Manish

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this
    forum by a team (https://frappe.io/webnotes). So please consider donating
    if you find this forum useful (https://frappe.io/buy). Even a small amount
    would be helpful.
  2. We should be able to replicate it at our end. So please give us as much
    information as you can. Please see it from the point of view of the person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and
    send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDfvchZKfZPuQsh4tE6WJCEh%2BirWuniGV6F%3D09mH6bum29Q%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this
    forum by a team (https://frappe.io/webnotes). So please consider donating if
    you find this forum useful (https://frappe.io/buy). Even a small amount
    would be helpful.
  2. We should be able to replicate it at our end. So please give us as much
    information as you can. Please see it from the point of view of the person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send
    only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/06B97FD2-5F8F-4150-8A9F-8D44752DAA28%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note

You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDftY374xssXcZkxU8PL0BqC4jZ2_XhLLz7gNDUCtE9uLVw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

4

On 16-Aug-2014, at 5:33 pm, Manish Shah sh...@gmail.com wrote:

Hi Rushabh,

Thanks for your response, I was able to fix this. Now, I am facing new
error. This is happening when I try to create new form with only one
field of data type text. Refer to the url for tracelog

http://dpaste.com/2SMAG5M

Maybe you have not run python setup.py develop in your app.

Regards
Manish

On 8/15/14, Rushabh Mehta rm...@gmail.com wrote:

On 15-Aug-2014, at 5:41 pm, Manish Shah sh...@gmail.com wrote:

Team,

I am facing error while trying to create new form in ERPNEXT

http://dpaste.com/0251XC3

There is an error in your json syntax of your site_config.json

Read the trace!

Regards
Manish

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this
    forum by a team (https://frappe.io/webnotes). So please consider donating
    if you find this forum useful (https://frappe.io/buy). Even a small amount
    would be helpful.
  2. We should be able to replicate it at our end. So please give us as much
    information as you can. Please see it from the point of view of the person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and
    send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDfvchZKfZPuQsh4tE6WJCEh%2BirWuniGV6F%3D09mH6bum29Q%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this
    forum by a team (https://frappe.io/webnotes). So please consider donating if
    you find this forum useful (https://frappe.io/buy). Even a small amount
    would be helpful.
  2. We should be able to replicate it at our end. So please give us as much
    information as you can. Please see it from the point of view of the person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send
    only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/06B97FD2-5F8F-4150-8A9F-8D44752DAA28%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note

You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDftY374xssXcZkxU8PL0BqC4jZ2_XhLLz7gNDUCtE9uLVw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note

You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/D181591A-0665-4EA7-902F-30DE309A78FB%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

5
What's the modules.txt for your app.

-Anand


On Sat, Aug 16, 2014 at 5:40 PM, Rushabh Mehta <rm...@gmail.com> wrote:

On 16-Aug-2014, at 5:33 pm, Manish Shah <sh...@gmail.com> wrote:

> Hi Rushabh,
>
> Thanks for your response, I was able to fix this. Now, I am facing new
> error. This is happening when I try to create new form with only one
> field of data type text. Refer to the url for tracelog
>
> http://dpaste.com/2SMAG5M

Maybe you have not run ```python setup.py develop``` in your app.

>
> Regards
> Manish
>
> On 8/15/14, Rushabh Mehta <rm...@gmail.com> wrote:
>>
>>
>> On 15-Aug-2014, at 5:41 pm, Manish Shah <sh...@gmail.com> wrote:
>>
>>> Team,
>>>
>>> I am facing error while trying to create new form in ERPNEXT
>>>
>>> http://dpaste.com/0251XC3
>>
>> There is an error in your json syntax of your site_config.json
>>
>> Read the trace!
>>
>>>
>>> Regards
>>> Manish
>>>
>>> --
>>> Note:
>>>
>>> If you are posting an issue,
>>>
>>> 1. ERPNext is a free and open source software and support is given on this
>>> forum by a team (https://frappe.io/webnotes). So please consider donating
>>> if you find this forum useful (https://frappe.io/buy). Even a small amount
>>> would be helpful.
>>> 2. We should be able to replicate it at our end. So please give us as much
>>> information as you can. Please see it from the point of view of the person
>>> receiving the communication.
>>> 3. Paste your code at http://pastebin.com or http://gist.github.com and
>>> send only the URL via email
>>> 4. For sending images, use http://imgur.com or other similar services. Do
>>> not send images as attachments. Links are good. Same goes for any file you
>>> are going to send.
>>>
>>> End of Note
>>> ---
>>> You received this message because you are subscribed to the Google Groups
>>> "ERPNext Developer Forum" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an
>>> email to erpnext-developer-forum+un...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDfvchZKfZPuQsh4tE6WJCEh%2BirWuniGV6F%3D09mH6bum29Q%40mail.gmail.com.

>>> For more options, visit https://groups.google.com/d/optout.

>>

>> –

>> Note:

>>

>> If you are posting an issue,

>>

>> 1. ERPNext is a free and open source software and support is given on this

>> forum by a team (https://frappe.io/webnotes). So please consider donating if

>> you find this forum useful (https://frappe.io/buy). Even a small amount

>> would be helpful.

>> 2. We should be able to replicate it at our end. So please give us as much

>> information as you can. Please see it from the point of view of the person

>> receiving the communication.

>> 3. Paste your code at http://pastebin.com or http://gist.github.com and send

>> only the URL via email

>> 4. For sending images, use http://imgur.com or other similar services. Do

>> not send images as attachments. Links are good. Same goes for any file you

>> are going to send.

>>

>> End of Note

>> —

>> You received this message because you are subscribed to the Google Groups

>> "ERPNext Developer Forum" group.

>> To unsubscribe from this group and stop receiving emails from it, send an

>> email to erpnext-developer-forum+un…@googlegroups.com.

>> To view this discussion on the web visit

>> https://groups.google.com/d/msgid/erpnext-developer-forum/06B97FD2-5F8F-4150-8A9F-8D44752DAA28%40gmail.com.

>> For more options, visit https://groups.google.com/d/optout.

>>

>

> –

> Note:

>

> If you are posting an issue,

>

> 1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.

> 2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.

> 3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email

> 4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

>

> End of Note

> —

> You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

> To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

> To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDftY374xssXcZkxU8PL0BqC4jZ2_XhLLz7gNDUCtE9uLVw%40mail.gmail.com.

> For more options, visit https://groups.google.com/d/optout.



–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.

  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.

  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email

  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/D181591A-0665-4EA7-902F-30DE309A78FB%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAAQzbF3uWfDq0DuO1U7djx%3DjR_1-w6ANe4mtrMMv3%2Bb68FmY%3Dg%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.
6

Hi Anand/Rushabh,

Thanks for your response.
I was getting the error even after executing python setup.py develop
command. Finally, I found the reason. I was trying to create new form
in the new module “Sample Module”. Once I changed the module to one of
the existing one then the error got resolved.
Request to share steps to be followed to create new module.

Thanks & Regards
Manish

On 8/16/14, Anand Doshi an...@erpnext.com wrote:

What’s the modules.txt for your app.

-Anand

On Sat, Aug 16, 2014 at 5:40 PM, Rushabh Mehta rm...@gmail.com wrote:

On 16-Aug-2014, at 5:33 pm, Manish Shah sh...@gmail.com wrote:

Hi Rushabh,

Thanks for your response, I was able to fix this. Now, I am facing new
error. This is happening when I try to create new form with only one
field of data type text. Refer to the url for tracelog

http://dpaste.com/2SMAG5M

Maybe you have not run python setup.py develop in your app.

Regards
Manish

On 8/15/14, Rushabh Mehta rm...@gmail.com wrote:

On 15-Aug-2014, at 5:41 pm, Manish Shah sh...@gmail.com wrote:

Team,

I am facing error while trying to create new form in ERPNEXT

http://dpaste.com/0251XC3

There is an error in your json syntax of your site_config.json

Read the trace!

Regards
Manish

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this
    forum by a team (https://frappe.io/webnotes). So please consider
    donating
    if you find this forum useful (https://frappe.io/buy). Even a small
    amount
    would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much
    information as you can. Please see it from the point of view of the
    person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com
    and
    send only the URL via email
  4. For sending images, use http://imgur.com or other similar
    services. Do
    not send images as attachments. Links are good. Same goes for any
    file
    you
    are going to send.

End of Note

You received this message because you are subscribed to the Google
Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it,
send
an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit

https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDfvchZKfZPuQsh4tE6WJCEh%2BirWuniGV6F%3D09mH6bum29Q%40mail.gmail.com
.

For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this
    forum by a team (https://frappe.io/webnotes). So please consider
    donating if
    you find this forum useful (https://frappe.io/buy). Even a small
    amount
    would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much
    information as you can. Please see it from the point of view of the
    person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com
    and send
    only the URL via email
  4. For sending images, use http://imgur.com or other similar services.
    Do
    not send images as attachments. Links are good. Same goes for any file
    you
    are going to send.

End of Note

You received this message because you are subscribed to the Google
Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send
an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit

https://groups.google.com/d/msgid/erpnext-developer-forum/06B97FD2-5F8F-4150-8A9F-8D44752DAA28%40gmail.com
.

For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this forum by a team (https://frappe.io/webnotes). So please consider
    donating if you find this forum useful (https://frappe.io/buy). Even a
    small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much information as you can. Please see it from the point of view of the
    person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and
    send only the URL via email
  4. For sending images, use http://imgur.com or other similar services.
    Do not send images as attachments. Links are good. Same goes for any file
    you are going to send.

End of Note

You received this message because you are subscribed to the Google
Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDftY374xssXcZkxU8PL0BqC4jZ2_XhLLz7gNDUCtE9uLVw%40mail.gmail.com
.
For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this
    forum by a team (https://frappe.io/webnotes). So please consider donating
    if you find this forum useful (https://frappe.io/buy). Even a small
    amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much
    information as you can. Please see it from the point of view of the
    person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and
    send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file
    you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/D181591A-0665-4EA7-902F-30DE309A78FB%40gmail.com
.
For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this
    forum by a team (https://frappe.io/webnotes). So please consider donating if
    you find this forum useful (https://frappe.io/buy). Even a small amount
    would be helpful.
  2. We should be able to replicate it at our end. So please give us as much
    information as you can. Please see it from the point of view of the person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send
    only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAAQzbF3uWfDq0DuO1U7djx%3DjR_1-w6ANe4mtrMMv3%2Bb68FmY%3Dg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note

You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDfvT1uFQETqz2CGPpzG%2BhKeC9dcy04AKTbMA4Lm%3De3emsw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

7
Manish,

please answer Anand's earlier question. check the modules.txt file




On 17-Aug-2014, at 11:51 am, Manish Shah <sh...@gmail.com> wrote:

Hi Anand/Rushabh,

Thanks for your response.
I was getting the error even after executing python setup.py develop
command. Finally, I found the reason. I was trying to create new form
in the new module "Sample Module". Once I changed the module to one of
the existing one then the error got resolved.
Request to share steps to be followed to create new module.

Thanks & Regards
Manish

On 8/16/14, Anand Doshi <an...@erpnext.com> wrote:
What's the modules.txt for your app.

-Anand


On Sat, Aug 16, 2014 at 5:40 PM, Rushabh Mehta <rm...@gmail.com> wrote:


On 16-Aug-2014, at 5:33 pm, Manish Shah <sh...@gmail.com> wrote:

Hi Rushabh,

Thanks for your response, I was able to fix this. Now, I am facing new
error. This is happening when I try to create new form with only one
field of data type text. Refer to the url for tracelog

http://dpaste.com/2SMAG5M

Maybe you have not run ```python setup.py develop``` in your app.


Regards
Manish

On 8/15/14, Rushabh Mehta <rm...@gmail.com> wrote:


On 15-Aug-2014, at 5:41 pm, Manish Shah <sh...@gmail.com> wrote:

Team,

I am facing error while trying to create new form in ERPNEXT

http://dpaste.com/0251XC3

There is an error in your json syntax of your site_config.json

Read the trace!


Regards
Manish

--
Note:

If you are posting an issue,

1. ERPNext is a free and open source software and support is given on
this
forum by a team (https://frappe.io/webnotes). So please consider
donating
if you find this forum useful (https://frappe.io/buy). Even a small
amount
would be helpful.
2. We should be able to replicate it at our end. So please give us as
much
information as you can. Please see it from the point of view of the
person
receiving the communication.
3. Paste your code at http://pastebin.com or http://gist.github.com
and
send only the URL via email
4. For sending images, use http://imgur.com or other similar
services. Do
not send images as attachments. Links are good. Same goes for any
file
you
are going to send.

End of Note
---
You received this message because you are subscribed to the Google
Groups
"ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it,
send
an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit

https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDfvchZKfZPuQsh4tE6WJCEh%2BirWuniGV6F%3D09mH6bum29Q%40mail.gmail.com
.
For more options, visit https://groups.google.com/d/optout.

--
Note:

If you are posting an issue,

1. ERPNext is a free and open source software and support is given on
this
forum by a team (https://frappe.io/webnotes). So please consider
donating if
you find this forum useful (https://frappe.io/buy). Even a small
amount
would be helpful.
2. We should be able to replicate it at our end. So please give us as
much
information as you can. Please see it from the point of view of the
person
receiving the communication.
3. Paste your code at http://pastebin.com or http://gist.github.com
and send
only the URL via email
4. For sending images, use http://imgur.com or other similar services.
Do
not send images as attachments. Links are good. Same goes for any file
you
are going to send.

End of Note
---
You received this message because you are subscribed to the Google
Groups
"ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send
an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit

https://groups.google.com/d/msgid/erpnext-developer-forum/06B97FD2-5F8F-4150-8A9F-8D44752DAA28%40gmail.com
.
For more options, visit https://groups.google.com/d/optout.


--
Note:

If you are posting an issue,

1. ERPNext is a free and open source software and support is given on
this forum by a team (https://frappe.io/webnotes). So please consider
donating if you find this forum useful (https://frappe.io/buy). Even a
small amount would be helpful.
2. We should be able to replicate it at our end. So please give us as
much information as you can. Please see it from the point of view of the
person receiving the communication.
3. Paste your code at http://pastebin.com or http://gist.github.com and
send only the URL via email
4. For sending images, use http://imgur.com or other similar services.
Do not send images as attachments. Links are good. Same goes for any file
you are going to send.

End of Note
---
You received this message because you are subscribed to the Google
Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDftY374xssXcZkxU8PL0BqC4jZ2_XhLLz7gNDUCtE9uLVw%40mail.gmail.com
.
For more options, visit https://groups.google.com/d/optout.

--
Note:

If you are posting an issue,

1. ERPNext is a free and open source software and support is given on
this
forum by a team (https://frappe.io/webnotes). So please consider donating
if you find this forum useful (https://frappe.io/buy). Even a small
amount would be helpful.
2. We should be able to replicate it at our end. So please give us as
much
information as you can. Please see it from the point of view of the
person
receiving the communication.
3. Paste your code at http://pastebin.com or http://gist.github.com and
send only the URL via email
4. For sending images, use http://imgur.com or other similar services. Do
not send images as attachments. Links are good. Same goes for any file
you
are going to send.

End of Note
---
You received this message because you are subscribed to the Google Groups
"ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/D181591A-0665-4EA7-902F-30DE309A78FB%40gmail.com
.
For more options, visit https://groups.google.com/d/optout.


--
Note:

If you are posting an issue,

1. ERPNext is a free and open source software and support is given on this
forum by a team (https://frappe.io/webnotes). So please consider donating if
you find this forum useful (https://frappe.io/buy). Even a small amount
would be helpful.
2. We should be able to replicate it at our end. So please give us as much
information as you can. Please see it from the point of view of the person
receiving the communication.
3. Paste your code at http://pastebin.com or http://gist.github.com and send
only the URL via email
4. For sending images, use http://imgur.com or other similar services. Do
not send images as attachments. Links are good. Same goes for any file you
are going to send.

End of Note
---
You received this message because you are subscribed to the Google Groups
"ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAAQzbF3uWfDq0DuO1U7djx%3DjR_1-w6ANe4mtrMMv3%2Bb68FmY%3Dg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


--
Note:

If you are posting an issue,

1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note
---
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDfvT1uFQETqz2CGPpzG%2BhKeC9dcy04AKTbMA4Lm%3De3emsw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/120744CB-FAD7-45A6-8946-48759AD1D267%40gmail.com.

    For more options, visit https://groups.google.com/d/optout.
8

Hi Rushabh,

Placed below the contents in the three different modules.txt

ERPNEXT:
Accounts
Buying
Home
HR
Manufacturing
Projects
Selling
Setup
Stock
Support
Utilities
Contacts

Shopping_Cart:
Shopping Cart

Frappe:
Core
Website

Regards
Manish

On 8/18/14, Rushabh Mehta rm...@gmail.com wrote:

Manish,

please answer Anand’s earlier question. check the modules.txt file

On 17-Aug-2014, at 11:51 am, Manish Shah sh...@gmail.com wrote:

Hi Anand/Rushabh,

Thanks for your response.
I was getting the error even after executing python setup.py develop
command. Finally, I found the reason. I was trying to create new form
in the new module “Sample Module”. Once I changed the module to one of
the existing one then the error got resolved.
Request to share steps to be followed to create new module.

Thanks & Regards
Manish

On 8/16/14, Anand Doshi an...@erpnext.com wrote:

What’s the modules.txt for your app.

-Anand

On Sat, Aug 16, 2014 at 5:40 PM, Rushabh Mehta rm...@gmail.com wrote:

On 16-Aug-2014, at 5:33 pm, Manish Shah sh...@gmail.com wrote:

Hi Rushabh,

Thanks for your response, I was able to fix this. Now, I am facing new
error. This is happening when I try to create new form with only one
field of data type text. Refer to the url for tracelog

http://dpaste.com/2SMAG5M

Maybe you have not run python setup.py develop in your app.

Regards
Manish

On 8/15/14, Rushabh Mehta rm...@gmail.com wrote:

On 15-Aug-2014, at 5:41 pm, Manish Shah sh...@gmail.com wrote:

Team,

I am facing error while trying to create new form in ERPNEXT

http://dpaste.com/0251XC3

There is an error in your json syntax of your site_config.json

Read the trace!

Regards
Manish

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given
    on
    this
    forum by a team (https://frappe.io/webnotes). So please consider
    donating
    if you find this forum useful (https://frappe.io/buy). Even a small
    amount
    would be helpful.
  2. We should be able to replicate it at our end. So please give us
    as
    much
    information as you can. Please see it from the point of view of the
    person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com
    and
    send only the URL via email
  4. For sending images, use http://imgur.com or other similar
    services. Do
    not send images as attachments. Links are good. Same goes for any
    file
    you
    are going to send.

End of Note

You received this message because you are subscribed to the Google
Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it,
send
an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit

https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDfvchZKfZPuQsh4tE6WJCEh%2BirWuniGV6F%3D09mH6bum29Q%40mail.gmail.com
.

For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this
    forum by a team (https://frappe.io/webnotes). So please consider
    donating if
    you find this forum useful (https://frappe.io/buy). Even a small
    amount
    would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much
    information as you can. Please see it from the point of view of the
    person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com
    and send
    only the URL via email
  4. For sending images, use http://imgur.com or other similar
    services.
    Do
    not send images as attachments. Links are good. Same goes for any
    file
    you
    are going to send.

End of Note

You received this message because you are subscribed to the Google
Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it,
send
an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit

https://groups.google.com/d/msgid/erpnext-developer-forum/06B97FD2-5F8F-4150-8A9F-8D44752DAA28%40gmail.com
.

For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this forum by a team (https://frappe.io/webnotes). So please consider
    donating if you find this forum useful (https://frappe.io/buy). Even a
    small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much information as you can. Please see it from the point of view of
    the
    person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com
    and
    send only the URL via email
  4. For sending images, use http://imgur.com or other similar services.
    Do not send images as attachments. Links are good. Same goes for any
    file
    you are going to send.

End of Note

You received this message because you are subscribed to the Google
Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDftY374xssXcZkxU8PL0BqC4jZ2_XhLLz7gNDUCtE9uLVw%40mail.gmail.com
.
For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this
    forum by a team (https://frappe.io/webnotes). So please consider
    donating
    if you find this forum useful (https://frappe.io/buy). Even a small
    amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much
    information as you can. Please see it from the point of view of the
    person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and
    send only the URL via email
  4. For sending images, use http://imgur.com or other similar services.
    Do
    not send images as attachments. Links are good. Same goes for any file
    you
    are going to send.

End of Note

You received this message because you are subscribed to the Google
Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send
an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/D181591A-0665-4EA7-902F-30DE309A78FB%40gmail.com
.
For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this
    forum by a team (https://frappe.io/webnotes). So please consider donating
    if
    you find this forum useful (https://frappe.io/buy). Even a small amount
    would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much
    information as you can. Please see it from the point of view of the
    person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and
    send
    only the URL via email
  4. For sending images, use http://imgur.com or other similar services.
    Do
    not send images as attachments. Links are good. Same goes for any file
    you
    are going to send.

End of Note

You received this message because you are subscribed to the Google
Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send
an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAAQzbF3uWfDq0DuO1U7djx%3DjR_1-w6ANe4mtrMMv3%2Bb68FmY%3Dg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this
    forum by a team (https://frappe.io/webnotes). So please consider donating
    if you find this forum useful (https://frappe.io/buy). Even a small amount
    would be helpful.
  2. We should be able to replicate it at our end. So please give us as much
    information as you can. Please see it from the point of view of the person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and
    send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDfvT1uFQETqz2CGPpzG%2BhKeC9dcy04AKTbMA4Lm%3De3emsw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this
    forum by a team (https://frappe.io/webnotes). So please consider donating if
    you find this forum useful (https://frappe.io/buy). Even a small amount
    would be helpful.
  2. We should be able to replicate it at our end. So please give us as much
    information as you can. Please see it from the point of view of the person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send
    only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/120744CB-FAD7-45A6-8946-48759AD1D267%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note

You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDftZBh0%3DJ%3D4e9o%3DtpzOMLWPZ_nsfa3awgJk1Rb38fXc63Q%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

9
Manish - your custom module must be present in the modules.txt of your app. Check if it is there.


On 18-Aug-2014, at 6:55 pm, Manish Shah <sh...@gmail.com> wrote:

Hi Rushabh,

Placed below the contents in the three different modules.txt

ERPNEXT:
Accounts
Buying
Home
HR
Manufacturing
Projects
Selling
Setup
Stock
Support
Utilities
Contacts

Shopping_Cart:
Shopping Cart

Frappe:
Core
Website

Regards
Manish

On 8/18/14, Rushabh Mehta <rm...@gmail.com> wrote:
Manish,

please answer Anand's earlier question. check the modules.txt file




On 17-Aug-2014, at 11:51 am, Manish Shah <sh...@gmail.com> wrote:

Hi Anand/Rushabh,

Thanks for your response.
I was getting the error even after executing python setup.py develop
command. Finally, I found the reason. I was trying to create new form
in the new module "Sample Module". Once I changed the module to one of
the existing one then the error got resolved.
Request to share steps to be followed to create new module.

Thanks & Regards
Manish

On 8/16/14, Anand Doshi <an...@erpnext.com> wrote:
What's the modules.txt for your app.

-Anand


On Sat, Aug 16, 2014 at 5:40 PM, Rushabh Mehta <rm...@gmail.com> wrote:


On 16-Aug-2014, at 5:33 pm, Manish Shah <sh...@gmail.com> wrote:

Hi Rushabh,

Thanks for your response, I was able to fix this. Now, I am facing new
error. This is happening when I try to create new form with only one
field of data type text. Refer to the url for tracelog

http://dpaste.com/2SMAG5M

Maybe you have not run ```python setup.py develop``` in your app.


Regards
Manish

On 8/15/14, Rushabh Mehta <rm...@gmail.com> wrote:


On 15-Aug-2014, at 5:41 pm, Manish Shah <sh...@gmail.com> wrote:

Team,

I am facing error while trying to create new form in ERPNEXT

http://dpaste.com/0251XC3

There is an error in your json syntax of your site_config.json

Read the trace!


Regards
Manish

--
Note:

If you are posting an issue,

1. ERPNext is a free and open source software and support is given
on
this
forum by a team (https://frappe.io/webnotes). So please consider
donating
if you find this forum useful (https://frappe.io/buy). Even a small
amount
would be helpful.
2. We should be able to replicate it at our end. So please give us
as
much
information as you can. Please see it from the point of view of the
person
receiving the communication.
3. Paste your code at http://pastebin.com or http://gist.github.com
and
send only the URL via email
4. For sending images, use http://imgur.com or other similar
services. Do
not send images as attachments. Links are good. Same goes for any
file
you
are going to send.

End of Note
---
You received this message because you are subscribed to the Google
Groups
"ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it,
send
an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit

https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDfvchZKfZPuQsh4tE6WJCEh%2BirWuniGV6F%3D09mH6bum29Q%40mail.gmail.com
.
For more options, visit https://groups.google.com/d/optout.

--
Note:

If you are posting an issue,

1. ERPNext is a free and open source software and support is given on
this
forum by a team (https://frappe.io/webnotes). So please consider
donating if
you find this forum useful (https://frappe.io/buy). Even a small
amount
would be helpful.
2. We should be able to replicate it at our end. So please give us as
much
information as you can. Please see it from the point of view of the
person
receiving the communication.
3. Paste your code at http://pastebin.com or http://gist.github.com
and send
only the URL via email
4. For sending images, use http://imgur.com or other similar
services.
Do
not send images as attachments. Links are good. Same goes for any
file
you
are going to send.

End of Note
---
You received this message because you are subscribed to the Google
Groups
"ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it,
send
an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit

https://groups.google.com/d/msgid/erpnext-developer-forum/06B97FD2-5F8F-4150-8A9F-8D44752DAA28%40gmail.com
.
For more options, visit https://groups.google.com/d/optout.


--
Note:

If you are posting an issue,

1. ERPNext is a free and open source software and support is given on
this forum by a team (https://frappe.io/webnotes). So please consider
donating if you find this forum useful (https://frappe.io/buy). Even a
small amount would be helpful.
2. We should be able to replicate it at our end. So please give us as
much information as you can. Please see it from the point of view of
the
person receiving the communication.
3. Paste your code at http://pastebin.com or http://gist.github.com
and
send only the URL via email
4. For sending images, use http://imgur.com or other similar services.
Do not send images as attachments. Links are good. Same goes for any
file
you are going to send.

End of Note
---
You received this message because you are subscribed to the Google
Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDftY374xssXcZkxU8PL0BqC4jZ2_XhLLz7gNDUCtE9uLVw%40mail.gmail.com
.
For more options, visit https://groups.google.com/d/optout.

--
Note:

If you are posting an issue,

1. ERPNext is a free and open source software and support is given on
this
forum by a team (https://frappe.io/webnotes). So please consider
donating
if you find this forum useful (https://frappe.io/buy). Even a small
amount would be helpful.
2. We should be able to replicate it at our end. So please give us as
much
information as you can. Please see it from the point of view of the
person
receiving the communication.
3. Paste your code at http://pastebin.com or http://gist.github.com and
send only the URL via email
4. For sending images, use http://imgur.com or other similar services.
Do
not send images as attachments. Links are good. Same goes for any file
you
are going to send.

End of Note
---
You received this message because you are subscribed to the Google
Groups
"ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send
an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/D181591A-0665-4EA7-902F-30DE309A78FB%40gmail.com
.
For more options, visit https://groups.google.com/d/optout.


--
Note:

If you are posting an issue,

1. ERPNext is a free and open source software and support is given on
this
forum by a team (https://frappe.io/webnotes). So please consider donating
if
you find this forum useful (https://frappe.io/buy). Even a small amount
would be helpful.
2. We should be able to replicate it at our end. So please give us as
much
information as you can. Please see it from the point of view of the
person
receiving the communication.
3. Paste your code at http://pastebin.com or http://gist.github.com and
send
only the URL via email
4. For sending images, use http://imgur.com or other similar services.
Do
not send images as attachments. Links are good. Same goes for any file
you
are going to send.

End of Note
---
You received this message because you are subscribed to the Google
Groups
"ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send
an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAAQzbF3uWfDq0DuO1U7djx%3DjR_1-w6ANe4mtrMMv3%2Bb68FmY%3Dg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


--
Note:

If you are posting an issue,

1. ERPNext is a free and open source software and support is given on this
forum by a team (https://frappe.io/webnotes). So please consider donating
if you find this forum useful (https://frappe.io/buy). Even a small amount
would be helpful.
2. We should be able to replicate it at our end. So please give us as much
information as you can. Please see it from the point of view of the person
receiving the communication.
3. Paste your code at http://pastebin.com or http://gist.github.com and
send only the URL via email
4. For sending images, use http://imgur.com or other similar services. Do
not send images as attachments. Links are good. Same goes for any file you
are going to send.

End of Note
---
You received this message because you are subscribed to the Google Groups
"ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDfvT1uFQETqz2CGPpzG%2BhKeC9dcy04AKTbMA4Lm%3De3emsw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
Note:

If you are posting an issue,

1. ERPNext is a free and open source software and support is given on this
forum by a team (https://frappe.io/webnotes). So please consider donating if
you find this forum useful (https://frappe.io/buy). Even a small amount
would be helpful.
2. We should be able to replicate it at our end. So please give us as much
information as you can. Please see it from the point of view of the person
receiving the communication.
3. Paste your code at http://pastebin.com or http://gist.github.com and send
only the URL via email
4. For sending images, use http://imgur.com or other similar services. Do
not send images as attachments. Links are good. Same goes for any file you
are going to send.

End of Note
---
You received this message because you are subscribed to the Google Groups
"ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/120744CB-FAD7-45A6-8946-48759AD1D267%40gmail.com.
For more options, visit https://groups.google.com/d/optout.


--
Note:

If you are posting an issue,

1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note
---
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDftZBh0%3DJ%3D4e9o%3DtpzOMLWPZ_nsfa3awgJk1Rb38fXc63Q%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/F0642888-B202-47AF-B03D-BEAA15E97E20%40gmail.com.

    For more options, visit https://groups.google.com/d/optout.