Frappe Bench install errors on Digital Ocean Ubuntu 14.04 64bit

Frappe Framework Bug
1
Hi,

I am trying to get ERPNext 4 up and running.

I noticed others with similar but somewhat different issues:

https://groups.google.com/forum/?pli=1#!topic/erpnext-developer-forum/wqqBlUx0ntA

and

https://groups.google.com/forum/?pli=1#!topic/erpnext-developer-forum/AZgE-u1BjNI

I have installed a working version of Frappe Bench on my laptop through virtualbox. No issues. Then I used the same method on Digital Ocean with the Frappe Bench install script found here:

https://github.com/frappe/frappe-bench

Trying this install script on Digital Ocean with Ubuntu 14.04 64bit does not work. I tried multiple times and received these same errors in attached pip.log and also shown here:

http://tny.cz/6874c729

I also noticed the following folders missing from Frappe Bench directory:
  • celery
  • celerybeat
  • celeryd
  • celeryd-multi
  • csscapture
  • csscombine
  • cssparse
  • frappe

So I obviously cannot launch frappe-bench. What am I doing wrong? Is there a fix?

Please advise,

fbdystang

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/2f349cde-8d62-44b7-ad09-b34b0633a9e1%40googlegroups.com.

    For more options, visit https://groups.google.com/d/optout.
2
Try this:
sudo apt-get install libxml2 libxslt libxml2-dev libxslt-dev


and run install.sh again as instructed in frappe-bench

-Anand.


On Thu, Jun 5, 2014 at 3:22 AM, 'fbdystang' via ERPNext Developer Forum <er...@googlegroups.com> wrote:
Hi,

I am trying to get ERPNext 4 up and running.

I noticed others with similar but somewhat different issues:


https://groups.google.com/forum/?pli=1#!topic/erpnext-developer-forum/wqqBlUx0ntA

and

https://groups.google.com/forum/?pli=1#!topic/erpnext-developer-forum/AZgE-u1BjNI


I have installed a working version of Frappe Bench on my laptop through virtualbox. No issues. Then I used the same method on Digital Ocean with the Frappe Bench install script found here:

https://github.com/frappe/frappe-bench


Trying this install script on Digital Ocean with Ubuntu 14.04 64bit does not work. I tried multiple times and received these same errors in attached pip.log and also shown here:

http://tny.cz/6874c729


I also noticed the following folders missing from Frappe Bench directory:

  • celery
  • celerybeat
  • celeryd
  • celeryd-multi
  • csscapture
  • csscombine
  • cssparse
  • frappe

So I obviously cannot launch frappe-bench. What am I doing wrong? Is there a fix?

Please advise,

fbdystang

–

Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/2f349cde-8d62-44b7-ad09-b34b0633a9e1%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.


–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAAQzbF1zPwCY4s6Cppq4quxOHvyjjqDgxjdRew%2Bg72QUtiMwQA%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.
3
fbdystang, let us know if it works out, so that we can update the readme in frappe-bench.

Thanks,
Anand.


On Thu, Jun 5, 2014 at 8:43 AM, Anand Doshi <an...@erpnext.com> wrote:
Try this:
sudo apt-get install libxml2 libxslt libxml2-dev libxslt-dev


and run install.sh again as instructed in frappe-bench

-Anand.


On Thu, Jun 5, 2014 at 3:22 AM, 'fbdystang' via ERPNext Developer Forum <er...@googlegroups.com> wrote:
Hi,

I am trying to get ERPNext 4 up and running.

I noticed others with similar but somewhat different issues:


https://groups.google.com/forum/?pli=1#!topic/erpnext-developer-forum/wqqBlUx0ntA

and

https://groups.google.com/forum/?pli=1#!topic/erpnext-developer-forum/AZgE-u1BjNI


I have installed a working version of Frappe Bench on my laptop through virtualbox. No issues. Then I used the same method on Digital Ocean with the Frappe Bench install script found here:

https://github.com/frappe/frappe-bench


Trying this install script on Digital Ocean with Ubuntu 14.04 64bit does not work. I tried multiple times and received these same errors in attached pip.log and also shown here:

http://tny.cz/6874c729


I also noticed the following folders missing from Frappe Bench directory:

  • celery
  • celerybeat
  • celeryd
  • celeryd-multi
  • csscapture
  • csscombine
  • cssparse
  • frappe

So I obviously cannot launch frappe-bench. What am I doing wrong? Is there a fix?

Please advise,

fbdystang

–

Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/2f349cde-8d62-44b7-ad09-b34b0633a9e1%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.



–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAAQzbF3jg3_-NHxH%3DtBj2kEEGj7qpNoxbYBfuhhPxF2u8wjHpw%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.
4
Anand,

This did not work. Ubuntu was unable to find libxslt to install it. Maybe we only need libxslt-dev and not libxslt? Here is the pip.log file:

https://gist.github.com/anonymous/2be0d74633551398a9bd

Near the bottom I now see this error:

error: command 'x86_64-linux-gnu-gcc' failed with exit status 4

Please advise.

Thanks,

fbdystang

On Wednesday, June 4, 2014 9:13:55 PM UTC-6, Anand Doshi wrote:
Try this:
sudo apt-get install libxml2 libxslt libxml2-dev libxslt-dev


and run install.sh again as instructed in frappe-bench

-Anand.


On Thu, Jun 5, 2014 at 3:22 AM, 'fbdystang' via ERPNext Developer Forum <erpnext-dev...@googlegroups.com> wrote:
Hi,

I am trying to get ERPNext 4 up and running.

I noticed others with similar but somewhat different issues:


https://groups.google.com/forum/?pli=1#!topic/erpnext-developer-forum/wqqBlUx0ntA

and

https://groups.google.com/forum/?pli=1#!topic/erpnext-developer-forum/AZgE-u1BjNI


I have installed a working version of Frappe Bench on my laptop through virtualbox. No issues. Then I used the same method on Digital Ocean with the Frappe Bench install script found here:

https://github.com/frappe/frappe-bench


Trying this install script on Digital Ocean with Ubuntu 14.04 64bit does not work. I tried multiple times and received these same errors in attached pip.log and also shown here:

http://tny.cz/6874c729


I also noticed the following folders missing from Frappe Bench directory:

  • celery
  • celerybeat
  • celeryd
  • celeryd-multi
  • csscapture
  • csscombine
  • cssparse
  • frappe

So I obviously cannot launch frappe-bench. What am I doing wrong? Is there a fix?

Please advise,

fbdystang

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/2f349cde-8d62-44b7-ad09-b34b0633a9e1%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.


–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/12380431-4baf-4727-aea7-60716ab9f208%40googlegroups.com.

    For more options, visit https://groups.google.com/d/optout.
5
Follow the instructions on the link I sent in the previous mail. See if it works. 

Sent from my phone

On 05-Jun-2014, at 10:19, "'fbdystang' via ERPNext Developer Forum" <er...@googlegroups.com> wrote:

Anand,

This did not work. Ubuntu was unable to find libxslt to install it. Maybe we only need libxslt-dev and not libxslt? Here is the pip.log file:

https://gist.github.com/anonymous/2be0d74633551398a9bd

Near the bottom I now see this error:

error: command 'x86_64-linux-gnu-gcc' failed with exit status 4

Please advise.

Thanks,

fbdystang

On Wednesday, June 4, 2014 9:13:55 PM UTC-6, Anand Doshi wrote:
Try this:
sudo apt-get install libxml2 libxslt libxml2-dev libxslt-dev


and run install.sh again as instructed in frappe-bench

-Anand.


On Thu, Jun 5, 2014 at 3:22 AM, 'fbdystang' via ERPNext Developer Forum <erpnext-dev...@googlegroups.com> wrote:
Hi,

I am trying to get ERPNext 4 up and running.

I noticed others with similar but somewhat different issues:


https://groups.google.com/forum/?pli=1#!topic/erpnext-developer-forum/wqqBlUx0ntA

and

https://groups.google.com/forum/?pli=1#!topic/erpnext-developer-forum/AZgE-u1BjNI


I have installed a working version of Frappe Bench on my laptop through virtualbox. No issues. Then I used the same method on Digital Ocean with the Frappe Bench install script found here:

https://github.com/frappe/frappe-bench


Trying this install script on Digital Ocean with Ubuntu 14.04 64bit does not work. I tried multiple times and received these same errors in attached pip.log and also shown here:

http://tny.cz/6874c729


I also noticed the following folders missing from Frappe Bench directory:

  • celery
  • celerybeat
  • celeryd
  • celeryd-multi
  • csscapture
  • csscombine
  • cssparse
  • frappe

So I obviously cannot launch frappe-bench. What am I doing wrong? Is there a fix?

Please advise,

fbdystang

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/2f349cde-8d62-44b7-ad09-b34b0633a9e1%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.


–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/12380431-4baf-4727-aea7-60716ab9f208%40googlegroups.com.

    For more options, visit https://groups.google.com/d/optout.

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/9ABE4A85-1B0B-47F5-8A6B-59051BEF1783%40iwebnotes.com.

    For more options, visit https://groups.google.com/d/optout.
6

On Thu, Jun 5, 2014 at 10:19 AM, ‘fbdystang’ via ERPNext Developer
Forum er...@googlegroups.com wrote:

Anand,

This did not work. Ubuntu was unable to find libxslt to install it. Maybe we
only need libxslt-dev and not libxslt? Here is the pip.log file:

gist:2be0d74633551398a9bd · GitHub

Near the bottom I now see this error:

error: command ‘x86_64-linux-gnu-gcc’ failed with exit status 4

Is it the $5 droplet by any chance? “)x86_64-linux-gnu-gcc: internal
compiler error: Killed (program cc1” indicates that it ran out of
memory.

Please advise.

Thanks,

fbdystang

–
Pratik
erpnext

7

Hey Anand,

apt-get installing doesn;t help with virtualenv (unless we use
–use-system-packages). This answer would confuse them, avoid.

On Thu, Jun 5, 2014 at 8:43 AM, Anand Doshi an...@erpnext.com wrote:

Try this:
sudo apt-get install libxml2 libxslt libxml2-dev libxslt-dev

(src: http://tightwadtechnica.com/?page_id=4163)

and run install.sh again as instructed in frappe-bench

-Anand.

On Thu, Jun 5, 2014 at 3:22 AM, ‘fbdystang’ via ERPNext Developer Forum
er...@googlegroups.com wrote:

Hi,

I am trying to get ERPNext 4 up and running.

I noticed others with similar but somewhat different issues:

https://groups.google.com/forum/?pli=1#!topic/erpnext-developer-forum/wqqBlUx0ntA

and

https://groups.google.com/forum/?pli=1#!topic/erpnext-developer-forum/AZgE-u1BjNI

I have installed a working version of Frappe Bench on my laptop through
virtualbox. No issues. Then I used the same method on Digital Ocean with the
Frappe Bench install script found here:

https://github.com/frappe/frappe-bench

Trying this install script on Digital Ocean with Ubuntu 14.04 64bit does
not work. I tried multiple times and received these same errors in attached
pip.log and also shown here:

http://tny.cz/6874c729

I also noticed the following folders missing from Frappe Bench directory:

celery
celerybeat
celeryd
celeryd-multi
csscapture
csscombine
cssparse
frappe

So I obviously cannot launch frappe-bench. What am I doing wrong? Is there
a fix?

Please advise,

fbdystang

–
Note:

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much
    information as you can. Please see it from the point of view of the person
    receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and
    send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/2f349cde-8d62-44b7-ad09-b34b0633a9e1%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much
    information as you can. Please see it from the point of view of the person
    receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send
    only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAAQzbF1zPwCY4s6Cppq4quxOHvyjjqDgxjdRew%2Bg72QUtiMwQA%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

–
Pratik
erpnext

8
All,

Ok, I did get this to work on Digital Ocean. The issue was that Digital Ocean doesn't allocate a swap space by default. The frappe-bench install script worked flawlessly after I allocated the 2G swap space. Here are the steps in case anyone else is running into the same problem:

Spin up (or rebuild) the droplet

Allocate 2GB swap space as shown here:
https://www.digitalocean.com/community/articles/how-to-add-swap-on-ubuntu-14-04

sudo apt-get install nmon     (this is for me as I am used to monitoring over the command line)

Follow procedure to install frappe-bench install script as shown here:
https://github.com/frappe/frappe-bench

Now, after these
  • Install nginx and supervisor
  • cp config/nginx.conf /etc/nginx/conf.d/frappe.conf
  • cp config/supervisor.conf /etc/supervisor/conf.d/frappe.conf

I issued:

sudo rm /etc/nginx/sites-enabled/default

My frappe-bench install was running but I could not see it. Port 80 revealed the "Welcome to nginx!" screen, and port 8000 revealed nothing.

Update: I just had to wait longer for nginx to fully reload. It took several minutes, but all seems to be working well now.

Hope this helps someone else.

Thanks,

fbdystang

On Wednesday, June 4, 2014 11:36:14 PM UTC-6, Pratik Vyas wrote:
On Thu, Jun 5, 2014 at 10:19 AM, 'fbdystang' via ERPNext Developer
Forum <erpnext-dev...@googlegroups.com> wrote:
> Anand,
>
> This did not work. Ubuntu was unable to find libxslt to install it. Maybe we
> only need libxslt-dev and not libxslt? Here is the pip.log file:
>
> https://gist.github.com/anonymous/2be0d74633551398a9bd
>
> Near the bottom I now see this error:
>
> error: command 'x86_64-linux-gnu-gcc' failed with exit status 4
>

Is it the $5 droplet by any chance?  ")x86_64-linux-gnu-gcc: internal
compiler error: Killed (program cc1" indicates that it ran out of
memory.

> Please advise.
>
> Thanks,
>
> fbdystang
>
--
Pratik
erpnext

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/d4d020e4-1e00-4c92-9deb-4267bb5971c6%40googlegroups.com.

    For more options, visit https://groups.google.com/d/optout.
9

On Fri, Jun 6, 2014 at 12:26 PM, ‘fbdystang’ via ERPNext Developer
Forum er...@googlegroups.com wrote:

All,

Ok, I did get this to work on Digital Ocean. The issue was that Digital
Ocean doesn’t allocate a swap space by default. The frappe-bench install
script worked flawlessly after I allocated the 2G swap space. Here are the
steps in case anyone else is running into the same problem:

Spin up (or rebuild) the droplet

Allocate 2GB swap space as shown here:
https://www.digitalocean.com/community/articles/how-to-add-swap-on-ubuntu-14-04

sudo apt-get install nmon (this is for me as I am used to monitoring
over the command line)

Follow procedure to install frappe-bench install script as shown here:
https://github.com/frappe/frappe-bench

Now, after these

Install nginx and supervisor
cp config/nginx.conf /etc/nginx/conf.d/frappe.conf
cp config/supervisor.conf /etc/supervisor/conf.d/frappe.conf

I issued:

sudo rm /etc/nginx/sites-enabled/default

My frappe-bench install was running but I could not see it. Port 80 revealed
the “Welcome to nginx!” screen, and port 8000 revealed nothing.

Update: I just had to wait longer for nginx to fully reload. It took several
minutes, but all seems to be working well now.

Great! Glad it worked. We should make a wiki page in frappe-bench for
Digital Ocean installation.

Thanks,

Pratik
erpnext

10
Pratik,

If I get enough time tomorrow I'll type up all the steps to do so. My little way of giving back to a great project. Would that be useful?

Thanks,

fbdystang

On Friday, June 6, 2014 1:03:39 AM UTC-6, Pratik Vyas wrote:
On Fri, Jun 6, 2014 at 12:26 PM, 'fbdystang' via ERPNext Developer
Forum <erpnext-dev...@googlegroups.com> wrote:
> All,
>
> Ok, I did get this to work on Digital Ocean. The issue was that Digital
> Ocean doesn't allocate a swap space by default. The frappe-bench install
> script worked flawlessly after I allocated the 2G swap space. Here are the
> steps in case anyone else is running into the same problem:
>
> Spin up (or rebuild) the droplet
>
> Allocate 2GB swap space as shown here:
> https://www.digitalocean.com/community/articles/how-to-add-swap-on-ubuntu-14-04
>
> sudo apt-get install nmon     (this is for me as I am used to monitoring
> over the command line)
>
> Follow procedure to install frappe-bench install script as shown here:
> https://github.com/frappe/frappe-bench
>
> Now, after these
>
> Install nginx and supervisor
> cp config/nginx.conf /etc/nginx/conf.d/frappe.conf
> cp config/supervisor.conf /etc/supervisor/conf.d/frappe.conf
>
> I issued:
>
> sudo rm /etc/nginx/sites-enabled/default
>
> My frappe-bench install was running but I could not see it. Port 80 revealed
> the "Welcome to nginx!" screen, and port 8000 revealed nothing.
>
> Update: I just had to wait longer for nginx to fully reload. It took several
> minutes, but all seems to be working well now.
>

Great! Glad it worked. We should make a wiki page in frappe-bench for
Digital Ocean installation.

Thanks,
--
Pratik
erpnext

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/854480a4-1b68-408f-b1c7-bfcf3665ffe4%40googlegroups.com.

    For more options, visit https://groups.google.com/d/optout.
11

On Fri, Jun 6, 2014 at 1:05 PM, ‘fbdystang’ via ERPNext Developer
Forum er...@googlegroups.com wrote:

Pratik,

If I get enough time tomorrow I’ll type up all the steps to do so. My little
way of giving back to a great project. Would that be useful?

Thanks,

fbdystang

Sure! It would be a nice contribution :slight_smile:

–
Pratik
erpnext

12
Here is a detailed step-by-step instruction for installing on digitralocean

https://docs.google.com/document/d/1Ks_dmwbD0Ay3z59JEjuUsDyr7oj5snygpNzl0Uik1Ys/edit?usp=sharing

On Friday, 6 June 2014 13:42:38 UTC+5:30, Pratik Vyas wrote:
On Fri, Jun 6, 2014 at 1:05 PM, 'fbdystang' via ERPNext Developer
Forum <erpnext-dev...@googlegroups.com> wrote:
> Pratik,
>
> If I get enough time tomorrow I'll type up all the steps to do so. My little
> way of giving back to a great project. Would that be useful?
>
> Thanks,
>
> fbdystang

Sure! It would be a nice contribution :)

--
Pratik
erpnext

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/dda6302b-ba43-4965-a2e9-4f6dbee06fef%40googlegroups.com.

    For more options, visit https://groups.google.com/d/optout.
13
Great - can you add it to the wiki so that it is searchable

https://github.com/frapp/erpnext/wiki



@rushabh_mehta
https://erpnext.org

On 06-Jun-2014, at 6:07 pm, ankit chiplunkar <an...@gmail.com> wrote:

Here is a detailed step-by-step instruction for installing on digitralocean

https://docs.google.com/document/d/1Ks_dmwbD0Ay3z59JEjuUsDyr7oj5snygpNzl0Uik1Ys/edit?usp=sharing

On Friday, 6 June 2014 13:42:38 UTC+5:30, Pratik Vyas wrote:
On Fri, Jun 6, 2014 at 1:05 PM, 'fbdystang' via ERPNext Developer
Forum <erpnext-dev...@googlegroups.com> wrote:
> Pratik,
>
> If I get enough time tomorrow I'll type up all the steps to do so. My little
> way of giving back to a great project. Would that be useful?
>
> Thanks,
>
> fbdystang

Sure! It would be a nice contribution :)

--
Pratik
erpnext

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/dda6302b-ba43-4965-a2e9-4f6dbee06fef%40googlegroups.com.

    For more options, visit https://groups.google.com/d/optout.

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/9B76DF25-2C7E-49E7-A34E-E4FEFB3A3A75%40gmail.com.

    For more options, visit https://groups.google.com/d/optout.