[Guide] How to install ERPNext v14 on Linux Ubuntu (step-by-step instructions)

[dineshpanchal432]

@shashank_shirke Thank you so much for detailed info.

[shashank_shirke]

@Manan_Shah

For newbies like me, please make a small change in the below instruction,
You need to Hit Esc key and then :wq to save and quit Vim

@Manan_Shah Hahaha that’s very humble of you to call yourself a newbie

Thanks for pointing out though, updated it!

[Manan_Shah]

I am a newbie for these tasks like Installation

On a serious note, this is the easiest installation guide I have come across so far. Thanks

[auliabismar]

MariaDB refused to start in Ubuntu 22
Please advise

[shashank_shirke]

Please post the error you’re getting. Also, try rebooting the server once and then check MySQL status by service mysql status

[jcagbay]

Hi! Followed your Ubuntu guide carefully but nothing showed on port 80 web. (Have done similar V14 install on latest Stream and Fedora releases with the same results.)
Here is the error when I bench restart:

$ bench restart
$ supervisorctl restart frappe:
error: <class 'PermissionError'>, [Errno 13] Permission denied: file: /usr/lib/python3/dist-packages/supervisor/xmlrpc.py line: 560
ERROR:
Traceback (most recent call last):
  File "/usr/local/bin/bench", line 8, in <module>
    sys.exit(cli())
  File "/usr/local/lib/python3.10/dist-packages/bench/cli.py", line 127, in cli
    bench_command()
  File "/usr/lib/python3/dist-packages/click/core.py", line 1128, in __call__
    return self.main(*args, **kwargs)
  File "/usr/lib/python3/dist-packages/click/core.py", line 1053, in main
    rv = self.invoke(ctx)
  File "/usr/lib/python3/dist-packages/click/core.py", line 1659, in invoke
    return _process_result(sub_ctx.command.invoke(sub_ctx))
  File "/usr/lib/python3/dist-packages/click/core.py", line 1395, in invoke
    return ctx.invoke(self.callback, **ctx.params)
  File "/usr/lib/python3/dist-packages/click/core.py", line 754, in invoke
    return __callback(*args, **kwargs)
  File "/usr/local/lib/python3.10/dist-packages/bench/commands/utils.py", line 41, in restart
    Bench(".").reload(web, supervisor, systemd)
  File "/usr/local/lib/python3.10/dist-packages/bench/utils/render.py", line 126, in wrapper_fn
    return fn(*args, **kwargs)
  File "/usr/local/lib/python3.10/dist-packages/bench/bench.py", line 150, in reload
    restart_supervisor_processes(bench_path=self.name, web_workers=web)
  File "/usr/local/lib/python3.10/dist-packages/bench/utils/bench.py", line 304, in restart_supervisor_processes
    bench.run(f"{sudo}supervisorctl restart {group}")
  File "/usr/local/lib/python3.10/dist-packages/bench/bench.py", line 47, in run
    return exec_cmd(cmd, cwd=cwd or self.cwd)
  File "/usr/local/lib/python3.10/dist-packages/bench/utils/__init__.py", line 155, in exec_cmd
    raise CommandFailedError
bench.exceptions.CommandFailedError

[Usman_Ali]

try this

Erpnext & Frappe 14+ Dev - DEVELOPMENT & PRODUCTION [UBUNTU/SERVER 22.04]

https://www.youtube.com/watch?v=4v4zs8TWleY ERPNext 12 Installation Guide ERPNext 13 Installation Guide ERPNext 14 Installation Guide DEBIAN 11 ERPNext 13, 14+DEV . NOTES SHOULD USE SUGGESTED SYSTEM because of python versions and frappe dependencies other systems might dont work SHOULD BE ONLY 2 USERS IN SYSTEM [ root & frappe ] you can use any other user other then frappe ROOT & FRAPPE PASSW…

[shashank_shirke]

@jcagbay

Here is the error when I bench restart:

Hi, this looks like a user permission issues. I hope you’re running all the commands as the [frappe-user] with sudo.

If you’re still facing issues, follow this to resolve the problem

Bench Update Error - Production V12.9.4

Resolved this by changing permissions for user frappe on supervisord. In the /etc/supervisor/supervisord.conf under add line chown… as shown below [unix_http_server] file=/var/tmp/supervisord.sock chmod=0700 chown=frappe:frappe

[jcagbay]

@shashank_shirke Thank you. That corrected the problem.

[CodingRockz]

@shashank_shirke - Great guide mate. I think this is probably the first correct guide for version 14 on ubuntu 22.04

I am struggling with installing my positiveSSL on the ERP site, is this something you do as a service?

[shashank_shirke]

Hi @CodingRockz

Good to know that you found the guide helpful. Regarding the SSL certificate issue, you’ll first have to first add a custom domain and then enable dns_multitenant on the default site and then install your SSL certificate on the site.

[mwogi]

@shashank_shirke This is largely a perfect guide thanks. I followed it and the only error that I encountered is on Mariadb barracuda issue.

It is important for the settings to be taken to /etc/mysql/mariadb.conf.d/mariadb.cnf instead of /etc/mysql/my.cnf.

That is the only change I did and it worked.

[DrSchnagels]

for me the mentioned one in the guide worked.

[DrSchnagels]

Hello Shashank!
Thank you so much for this guide. Recently I was able to install v13 with my own collected infos, but I never got to work production mode or the correct creation of PDF files.
I used your guide to install a new VM. I have a Proxmox server and I used the LXC Ubuntu 22.04 template.
Everything installed fine and it is much better than my own install guide.
I have one remaining issue: When i create an offer and I want to create&download the offer-PDF-file, then the PDF is zoomed in and the outer edges of the page are missing.
Do you have an idea how to solve this?
Thank you very much for your work!
Edit: It might be this bug:

PDF generate problem

Can anyone shed some light on exactly how they upgraded to the latest version of wkhtmltopdf ?? I thought the version in use had special changes specific to frappe framework. I would like to upgrade my version as well but I am unsure exactly how. I have read so many horror stories about trying to do it from the repo that you end up with versions missing qr patches or missing frappe patches. Any help or pointers to a success story would be greatly appreciated. BKM

[shashank_shirke]

@mwogi

It is important for the settings to be taken to /etc/mysql/mariadb.conf.d/mariadb.cnf instead of /etc/mysql/my.cnf.

Hi @mwogi

Thanks for the update on this. Some installations might require additional configuration to be done in MariaDB cnf files as well. This was required in v13 but for v14 I tried with just the my.cnf file and it did work.

But I understand some server images and packages repos are different and so might require additional configs. Thanks for updating this.

Also, please do share the exact config you used in the mariadb.cnf file so that it will be helpful for others facing this issue.

[shashank_shirke]

Hi @DrSchnagels

Great to know that you found the guide useful. As for the PDF generation issue, this has been reported in the past as well.

Can you confirm what version of wkhtmltopdf have you installed by running;

wkhtmltopdf --version

Also, if possible share a screenshot of a sample PDF file that you’re facing issues with.

[DrSchnagels]

this is my output:
Welcome to Ubuntu 22.04.1 LTS (GNU/Linux 5.15.39-3-pve x86_64)
wkhtmltopdf 0.12.6

[DrSchnagels]

Hi!
Can you help me understand why there is two times a
“sudo bench setup production [frappe-user]”
in 7.3 and 7.5 ?
Thanks!

[aldoblack]

@shashank_shirke the link you attached worked. Thank you!

[shashank_shirke]

@DrSchnagels

help me understand why there is two times

This is just to make sure that the NGINX config file is created correctly. Sometimes the NGINX config doesn’t get written correctly the first time so running the command twice ensure that there are no issues.