I tried to install with the frappe-bench instructions. However the install would fail unless I installed libblas-dev and liblapack-dev. Are these supposed to be required? Thanks!
–
Note:
If you are posting an issue,
- We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
- Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
- For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.
End of Note
—
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/bd1d7fae-ee01-4001-8095-75e1a3c987c4%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Hey John
On Fri, May 9, 2014 at 11:35 PM, John Hooks ho...@gmail.com wrote:
I tried to install with the frappe-bench instructions. However the install
would fail unless I installed libblas-dev and liblapack-dev. Are these
supposed to be required? Thanks!
These seem to be algebra libs and we don’t use them.
–
Note:
If you are posting an issue,
- We should be able to replicate it at our end. So please give us as much
information as you can. Please see it from the point of view of the person
receiving the communication.
- Paste your code at http://pastebin.com or http://gist.github.com and send
only the URL via email
- For sending images, use http://imgur.com or other similar services. Do
not send images as attachments. Links are good. Same goes for any file you
are going to send.
End of Note
You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/bd1d7fae-ee01-4001-8095-75e1a3c987c4%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
–
Pratik
erpnext
Ok thanks. I'm not sure why it would fail without it. It gave me the error x86_64-linux-gnu-gcc failed with exit status 1 and those seemed to clear it. Oh well at least it installed.
On Friday, May 9, 2014 2:18:05 PM UTC-4, Pratik Vyas wrote:
Hey John
On Fri, May 9, 2014 at 11:35 PM, John Hooks <ho...@gmail.com> wrote:
> I tried to install with the frappe-bench instructions. However the install
> would fail unless I installed libblas-dev and liblapack-dev. Are these
> supposed to be required? Thanks!
>
These seem to be algebra libs and we don't use them.
> --
> Note:
>
> If you are posting an issue,
> 1. We should be able to replicate it at our end. So please give us as much
> information as you can. Please see it from the point of view of the person
> receiving the communication.
> 2. Paste your code at http://pastebin.com or http://gist.github.com and send
> only the URL via email
> 3. For sending images, use http://imgur.com or other similar services. Do
> not send images as attachments. Links are good. Same goes for any file you
> are going to send.
>
> End of Note
> ---
> You received this message because you are subscribed to the Google Groups
> "ERPNext Developer Forum" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to erpnext-developer-forum+un...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/erpnext-developer-forum/bd1d7fae-ee01-4001-8095-75e1a3c987c4%40googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
--
Pratik
erpnext
–
Note:
If you are posting an issue,
- We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
- Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
- For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.
End of Note
—
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/2b57d19c-f75b-410f-a586-b4da1631ac17%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
GCC is known fail with bench if you have less memory (<1G). Running install a few times does work sometimes.
On 10 May 2014 00:44, "John Hooks" <
ho...@gmail.com> wrote:
Ok thanks. I'm not sure why it would fail without it. It gave me the error x86_64-linux-gnu-gcc failed with exit status 1 and those seemed to clear it. Oh well at least it installed.
On Friday, May 9, 2014 2:18:05 PM UTC-4, Pratik Vyas wrote:
Hey John
On Fri, May 9, 2014 at 11:35 PM, John Hooks <ho...@gmail.com> wrote:
> I tried to install with the frappe-bench instructions. However the install
> would fail unless I installed libblas-dev and liblapack-dev. Are these
> supposed to be required? Thanks!
>
These seem to be algebra libs and we don't use them.
> --
> Note:
>
> If you are posting an issue,
> 1. We should be able to replicate it at our end. So please give us as much
> information as you can. Please see it from the point of view of the person
> receiving the communication.
> 2. Paste your code at http://pastebin.com or http://gist.github.com and send
> only the URL via email
> 3. For sending images, use http://imgur.com or other similar services. Do
> not send images as attachments. Links are good. Same goes for any file you
> are going to send.
>
> End of Note
> ---
> You received this message because you are subscribed to the Google Groups
> "ERPNext Developer Forum" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to erpnext-developer-forum+un...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/erpnext-developer-forum/bd1d7fae-ee01-4001-8095-75e1a3c987c4%40googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
--
Pratik
erpnext
–
Note:
If you are posting an issue,
- We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
- Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
- For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.
End of Note
—
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/2b57d19c-f75b-410f-a586-b4da1631ac17%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
I saw you posted that to someone else. I have 2 gigs currently and it would fail everytime. I did notice however I posted the wrong package. It should be liblas-dev not libblas-dev. Sorry about that. Liblas-dev is an ASPRS LiDAR data translation library
On Friday, May 9, 2014 3:35:55 PM UTC-4, Pratik Vyas wrote:
GCC is known fail with bench if you have less memory (<1G). Running install a few times does work sometimes.
On 10 May 2014 00:44, "John Hooks" <
ho...@gmail.com> wrote:
Ok thanks. I'm not sure why it would fail without it. It gave me the error x86_64-linux-gnu-gcc failed with exit status 1 and those seemed to clear it. Oh well at least it installed.
On Friday, May 9, 2014 2:18:05 PM UTC-4, Pratik Vyas wrote:
Hey John
On Fri, May 9, 2014 at 11:35 PM, John Hooks <ho...@gmail.com> wrote:
> I tried to install with the frappe-bench instructions. However the install
> would fail unless I installed libblas-dev and liblapack-dev. Are these
> supposed to be required? Thanks!
>
These seem to be algebra libs and we don't use them.
> --
> Note:
>
> If you are posting an issue,
> 1. We should be able to replicate it at our end. So please give us as much
> information as you can. Please see it from the point of view of the person
> receiving the communication.
> 2. Paste your code at http://pastebin.com or http://gist.github.com and send
> only the URL via email
> 3. For sending images, use http://imgur.com or other similar services. Do
> not send images as attachments. Links are good. Same goes for any file you
> are going to send.
>
> End of Note
> ---
> You received this message because you are subscribed to the Google Groups
> "ERPNext Developer Forum" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to erpnext-developer-forum+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/erpnext-developer-forum/bd1d7fae-ee01-4001-8095-75e1a3c987c4%40googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
--
Pratik
erpnext
–
Note:
If you are posting an issue,
- We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
- Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
- For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.
End of Note
—
You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/2b57d19c-f75b-410f-a586-b4da1631ac17%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
–
Note:
If you are posting an issue,
- We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
- Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
- For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.
End of Note
—
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/44f0c08f-e12f-419b-8749-ce13abc3fc66%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
The second lib I posted didn't affect anything.
On Friday, May 9, 2014 3:35:55 PM UTC-4, Pratik Vyas wrote:
GCC is known fail with bench if you have less memory (<1G). Running install a few times does work sometimes.
On 10 May 2014 00:44, "John Hooks" <
ho...@gmail.com> wrote:
Ok thanks. I'm not sure why it would fail without it. It gave me the error x86_64-linux-gnu-gcc failed with exit status 1 and those seemed to clear it. Oh well at least it installed.
On Friday, May 9, 2014 2:18:05 PM UTC-4, Pratik Vyas wrote:
Hey John
On Fri, May 9, 2014 at 11:35 PM, John Hooks <ho...@gmail.com> wrote:
> I tried to install with the frappe-bench instructions. However the install
> would fail unless I installed libblas-dev and liblapack-dev. Are these
> supposed to be required? Thanks!
>
These seem to be algebra libs and we don't use them.
> --
> Note:
>
> If you are posting an issue,
> 1. We should be able to replicate it at our end. So please give us as much
> information as you can. Please see it from the point of view of the person
> receiving the communication.
> 2. Paste your code at http://pastebin.com or http://gist.github.com and send
> only the URL via email
> 3. For sending images, use http://imgur.com or other similar services. Do
> not send images as attachments. Links are good. Same goes for any file you
> are going to send.
>
> End of Note
> ---
> You received this message because you are subscribed to the Google Groups
> "ERPNext Developer Forum" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to erpnext-developer-forum+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/erpnext-developer-forum/bd1d7fae-ee01-4001-8095-75e1a3c987c4%40googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
--
Pratik
erpnext
–
Note:
If you are posting an issue,
- We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
- Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
- For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.
End of Note
—
You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/2b57d19c-f75b-410f-a586-b4da1631ac17%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
–
Note:
If you are posting an issue,
- We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
- Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
- For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.
End of Note
—
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/dbb97bb8-8d0b-443a-ad31-04dc9c2d4ad1%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
On Sat, May 10, 2014 at 1:13 AM, John Hooks ho...@gmail.com wrote:
I saw you posted that to someone else. I have 2 gigs currently and it would
fail everytime.
Okay, then the problem would definitely be something else.
I did notice however I posted the wrong package. It should
be liblas-dev not libblas-dev. Sorry about that. Liblas-dev is an ASPRS
LiDAR data translation library
Maybe any of the dependencies liblas-dev fixed the issue (no lasers in
our ERP ;)). I’ve tried with clean Ubuntu and Debian. Will check if
it’s installed in the debian vm we ship.
Haha that would be cool if it came with lasers. If it helps I used Ubuntu server 13.10. I’m just glad it’s working now 
Sent from my iPhone
On May 9, 2014, at 4:13 PM, Pratik Vyas pd...@gmail.com wrote:
On Sat, May 10, 2014 at 1:13 AM, John Hooks ho...@gmail.com wrote:
I saw you posted that to someone else. I have 2 gigs currently and it would
fail everytime.
Okay, then the problem would definitely be something else.
I did notice however I posted the wrong package. It should
be liblas-dev not libblas-dev. Sorry about that. Liblas-dev is an ASPRS
LiDAR data translation library
Maybe any of the dependencies liblas-dev fixed the issue (no lasers in
our ERP ;)). I’ve tried with clean Ubuntu and Debian. Will check if
it’s installed in the debian vm we ship.
–
Note:
If you are posting an issue,
- We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
- Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
- For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.
End of Note
You received this message because you are subscribed to a topic in the Google Groups “ERPNext Developer Forum” group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/erpnext-developer-forum/VRAU7-uwjKI/unsubscribe.
To unsubscribe from this group and all its topics, send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAG8U0EkeFAUaBgXNsoxss4fS1SSprtUkRnf66s9ELr4VJDKaTA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
–
Note:
If you are posting an issue,
- We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
- Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
- For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.
End of Note
You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/246F3CAE-87F2-4C4F-AE19-27171B984740%40gmail.com.
For more options, visit https://groups.google.com/d/optout.