Multitenant System

Frappe Framework Bug
1
Hi,

I want to know, how I can achieve Multitenancy in ERPNext? I have create fresh database and conf file manually, but not getting how to map tenant to there respective database.

Regards,
Saurabh




–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/cd69ba57-cb30-4e7d-a71c-4c3dae0ebb58%40googlegroups.com.

    For more options, visit https://groups.google.com/d/optout.
2
Hi,

How can I create Multitenant System for ERPNext?


Regards,
Saurabh

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP-GgkyJaVfCEuTTwHs8M3FRo5YgbfbihX9–SsagemaOw%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.
3

Hi Saurabh,

On Sat, Mar 8, 2014 at 1:35 PM, Saurabh Palande sa...@gmail.com wrote:

Hi,

How can I create Multitenant System for ERPNext?

Yes you can. I’ll create a wiki page (for version 3) and reply in
sometime. Version 4 is multitenant out of the box.

Regards,
Saurabh

–
Note:

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much
    information as you can. Please see it from the point of view of the person
    receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send
    only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP-GgkyJaVfCEuTTwHs8M3FRo5YgbfbihX9--SsagemaOw%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

Thanks,

Pratik
erpnext

4

Hi Saurabh,

On Sat, Mar 8, 2014 at 1:35 PM, Saurabh Palande sa...@gmail.com wrote:

Hi,

How can I create Multitenant System for ERPNext?

Can you try to follow this,

Post any errors you get.

Thanks

Pratik
erpnext

5
Hi Pratik,

Thank you,

I have followed steps as ,

1. Install ERPNext and change to erpnext directory: i have installed erpnext at :-- /home/indictrans/erpnext/erpnext then cd .. now I am at /home/indictrans/erpnext

2. create sites directory: created sites directory at :-- /home/indictrans/erpnext/sites

3. Add sites_dir to conf.py : added sites_dir to conf file at:-- /home/indictrans/erpnext/erpnext/conf.py

4. Move the existing site to sites directory : mkdir -p sites/test_erp/ then mv /home/indictrans/erpnext/erpnext/public sites/test_erp/public

5. make site_config.json : edit sites/test_erp/site_config.json but got error saying Error: no "edit" mailcap rules found for type "application/json", so I have create it using VIM command and added the mentioned content as it is.

6. Then moved to path /home/indictrans/erpnext/erpnext and executed ./lib/wnf.py --install test2 -- test_erp for new setup but stuck with error wnf.py: error: unrecognized arguments: -- site_name





On Sat, Mar 8, 2014 at 11:13 PM, Pratik Vyas <pd...@gmail.com> wrote:
Hi Saurabh,

On Sat, Mar 8, 2014 at 1:35 PM, Saurabh Palande <sa...@gmail.com> wrote:
> Hi,
>
> How can I create Multitenant System for ERPNext?
>
Can you try to follow this,
https://github.com/webnotes/erpnext/wiki/Setup-Multitenancy-for-ERPNext-3

Post any errors you get.


Thanks
--
Pratik
erpnext

--
Note:

If you are posting an issue,
1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note
---
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAG8U0EnaHiXWwx16aiOk-QHGuO2L%2BtBQn7sVsDpu7pB-mtxgGA%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.




–
S.S.Palande

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP92K_As9%3DgYrdOh%3DXmR60L5A6J9N%2BOnAadv%3DGs6zJuN4Q%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.
6

Hi Saurabh,

On Mon, Mar 10, 2014 at 12:27 PM, Saurabh Palande sa...@gmail.com wrote:

Hi Pratik,

Thank you,

I have followed steps as ,

  1. Install ERPNext and change to erpnext directory: i have installed erpnext
    at :-- /home/indictrans/erpnext/erpnext then cd … now I am at
    /home/indictrans/erpnext

  2. create sites directory: created sites directory at :–
    /home/indictrans/erpnext/sites

  3. Add sites_dir to conf.py : added sites_dir to conf file at:–
    /home/indictrans/erpnext/erpnext/conf.py

  4. Move the existing site to sites directory : mkdir -p sites/test_erp/
    then mv /home/indictrans/erpnext/erpnext/public sites/test_erp/public

  5. make site_config.json : edit sites/test_erp/site_config.json but got
    error saying Error: no “edit” mailcap rules found for type
    “application/json”, so I have create it using VIM command and added the
    mentioned content as it is.

Sorry, it can be confused with the Autotools make, changed the word to write.

  1. Then moved to path /home/indictrans/erpnext/erpnext and executed
    ./lib/wnf.py --install test2 – test_erp for new setup but stuck with error
    wnf.py: error: unrecognized arguments: – site_name

it was a typo, should be “–site site_name”

Thanks,

Pratik
erpnext

1 Like
7
Hi Pratik,

I have used write sites/test_erp/site_config.json but getting error saying write: sites/test_erp/site_config.json is not logged in
so again I create it using vim sites/test_erp/site_config.json.

Then I run ./lib/wnf.py --install test --site test_erp command but getting following error,
Trace-back is:
ga...@gangadhar-System-Product-Name:/home/erpnext/erpnext$ ./lib/wnf.py --install test4 --site test_erp
MySQL root password:
Created user test
Created database test
Granted privileges to user test and database test
Starting database import...
Imported from database lib/webnotes/../conf/Framework.sql
Installing app...
Traceback (most recent call last):
File "./lib/wnf.py", line 803, in <module>
main()
File "./lib/wnf.py", line 23, in main
run(fn, parsed_args)
File "./lib/wnf.py", line 41, in run
out = globals().get(fn)(*args.get(fn), **args)
File "./lib/wnf.py", line 34, in new_fn
return fn(*args, **new_kwargs)
File "./lib/wnf.py", line 224, in install
inst.install(db_name, source_sql=source_sql, verbose=verbose, force=force, admin_password=admin_password)
File "lib/webnotes/install_lib/install.py", line 88, in install
self.install_app(verbose=verbose)
File "lib/webnotes/install_lib/install.py", line 104, in install_app
sync_for("lib", force=True, sync_everything=True, verbose=verbose)
File "lib/webnotes/model/sync.py", line 20, in sync_for
return walk_and_sync(get_path(folder), force, sync_everything, verbose=verbose)
File "lib/webnotes/model/sync.py", line 45, in walk_and_sync
if import_file(module_name, doctype, name, force=force) and verbose:
File "lib/webnotes/modules/import_file.py", line 30, in import_file
ret = import_file_by_path(path, force)
File "lib/webnotes/modules/import_file.py", line 51, in import_file_by_path
import_doclist(doclist)
File "lib/webnotes/modules/import_file.py", line 101, in import_doclist
new_bean.insert()
File "lib/webnotes/model/bean.py", line 260, in insert
return self.save()
File "lib/webnotes/model/bean.py", line 297, in save
self.prepare_for_save("save")
File "lib/webnotes/model/bean.py", line 197, in prepare_for_save
self.update_timestamps_and_docstatus()
File "lib/webnotes/model/bean.py", line 179, in update_timestamps_and_docstatus
ts = now()
File "lib/webnotes/utils/__init__.py", line 206, in now
return now_datetime().strftime('%Y-%m-%d %H:%M:%S')
File "lib/webnotes/utils/__init__.py", line 179, in now_datetime
return convert_utc_to_user_timezone(datetime.utcnow())
File "lib/webnotes/utils/__init__.py", line 196, in convert_utc_to_user_timezone
return utcnow.astimezone(timezone(get_user_time_zone()))
File "lib/webnotes/utils/__init__.py", line 183, in get_user_time_zone
webnotes.local.user_time_zone = webnotes.cache().get_value("time_zone")
File "lib/webnotes/memc.py", line 20, in get_value
val = self.get(self.n(key))
File "/usr/local/lib/python2.7/dist-packages/memcache.py", line 898, in get
return self._get('get', key)
File "/usr/local/lib/python2.7/dist-packages/memcache.py", line 847, in _get
self.check_key(key)
File "/usr/local/lib/python2.7/dist-packages/memcache.py", line 1062, in check_key
"Control characters not allowed")
memcache.MemcachedKeyCharacterError: Control characters not allowed





On Mon, Mar 10, 2014 at 12:58 PM, Pratik Vyas <pd...@gmail.com> wrote:
Hi Saurabh,

On Mon, Mar 10, 2014 at 12:27 PM, Saurabh Palande <sa...@gmail.com> wrote:
> Hi Pratik,
>
> Thank you,
>
> I have followed steps as ,
>
> 1. Install ERPNext and change to erpnext directory: i have installed erpnext
> at :-- /home/indictrans/erpnext/erpnext then cd .. now I am at
> /home/indictrans/erpnext
>
> 2. create sites directory: created sites directory at :--
> /home/indictrans/erpnext/sites
>
> 3. Add sites_dir to conf.py : added sites_dir to conf file at:--
> /home/indictrans/erpnext/erpnext/conf.py
>
> 4. Move the existing site to sites directory : mkdir -p sites/test_erp/
> then mv /home/indictrans/erpnext/erpnext/public sites/test_erp/public
>
> 5. make site_config.json : edit sites/test_erp/site_config.json but got
> error saying Error: no "edit" mailcap rules found for type
> "application/json", so I have create it using VIM command and added the
> mentioned content as it is.
>

Sorry, it can be confused with the Autotools make, changed the word to write.

> 6. Then moved to path /home/indictrans/erpnext/erpnext and executed
> ./lib/wnf.py --install test2 -- test_erp for new setup but stuck with error
> wnf.py: error: unrecognized arguments: -- site_name

it was a typo, should be "--site site_name"
>
>


Thanks,
--
Pratik
erpnext

--
Note:

If you are posting an issue,
1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note
---
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAG8U0EkRBPkhFyUkhp54%2Bd-OYu0MmqZSHv%2BmpcnhQSiA0VnWyg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP9CMiQKCQdyEb%3DG8mjA3THPcGkUX97RdD1rjmG4Zq2PxQ%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.
8
Hi Pratik,

Thank You for the help. Issue is resolved now.

Regards,


On Mon, Mar 10, 2014 at 2:52 PM, Saurabh Palande <sa...@gmail.com> wrote:
Hi Pratik,

I have used write sites/test_erp/site_config.json but getting error saying write: sites/test_erp/site_config.json is not logged in
so again I create it using vim sites/test_erp/site_config.json.

Then I run ./lib/wnf.py --install test --site test_erp command but getting following error,
Trace-back is:
ga...@gangadhar-System-Product-Name:/home/erpnext/erpnext$ ./lib/wnf.py --install test4 --site test_erp
MySQL root password:
Created user test
Created database test
Granted privileges to user test and database test
Starting database import...
Imported from database lib/webnotes/../conf/Framework.sql
Installing app...
Traceback (most recent call last):
File "./lib/wnf.py", line 803, in <module>
main()
File "./lib/wnf.py", line 23, in main
run(fn, parsed_args)
File "./lib/wnf.py", line 41, in run
out = globals().get(fn)(*args.get(fn), **args)
File "./lib/wnf.py", line 34, in new_fn
return fn(*args, **new_kwargs)</div><div>  File &quot;./lib/wnf.py&quot;, line 224, in install</div><div>    inst.install(db_name, source_sql=source_sql, verbose=verbose, force=force, admin_password=admin_password)</div>
File "lib/webnotes/install_lib/install.py", line 88, in install
self.install_app(verbose=verbose)
File "lib/webnotes/install_lib/install.py", line 104, in install_app
sync_for("lib", force=True, sync_everything=True, verbose=verbose)
File "lib/webnotes/model/sync.py", line 20, in sync_for
return walk_and_sync(get_path(folder), force, sync_everything, verbose=verbose)
File "lib/webnotes/model/sync.py", line 45, in walk_and_sync
if import_file(module_name, doctype, name, force=force) and verbose:
File "lib/webnotes/modules/import_file.py", line 30, in import_file
ret = import_file_by_path(path, force)
File "lib/webnotes/modules/import_file.py", line 51, in import_file_by_path
import_doclist(doclist)
File "lib/webnotes/modules/import_file.py", line 101, in import_doclist
new_bean.insert()
File "lib/webnotes/model/bean.py", line 260, in insert
return self.save()
File "lib/webnotes/model/bean.py", line 297, in save
self.prepare_for_save(&quot;save&quot;)</div><div>  File &quot;lib/webnotes/model/bean.py&quot;, line 197, in prepare_for_save</div><div>    self.update_timestamps_and_docstatus()</div><div>  File &quot;lib/webnotes/model/bean.py&quot;, line 179, in update_timestamps_and_docstatus</div>
ts = now()
File "lib/webnotes/utils/__init__.py", line 206, in now
return now_datetime().strftime('%Y-%m-%d %H:%M:%S')
File "lib/webnotes/utils/__init__.py", line 179, in now_datetime
return convert_utc_to_user_timezone(datetime.utcnow())
File "lib/webnotes/utils/__init__.py", line 196, in convert_utc_to_user_timezone
return utcnow.astimezone(timezone(get_user_time_zone()))
File "lib/webnotes/utils/__init__.py", line 183, in get_user_time_zone
webnotes.local.user_time_zone = webnotes.cache().get_value("time_zone")
File "lib/webnotes/memc.py", line 20, in get_value
val = self.get(self.n(key))
File "/usr/local/lib/python2.7/dist-packages/memcache.py", line 898, in get
return self._get('get', key)
File "/usr/local/lib/python2.7/dist-packages/memcache.py", line 847, in _get
self.check_key(key)
File "/usr/local/lib/python2.7/dist-packages/memcache.py", line 1062, in check_key
"Control characters not allowed")
memcache.MemcachedKeyCharacterError: Control characters not allowed





On Mon, Mar 10, 2014 at 12:58 PM, Pratik Vyas <pd...@gmail.com> wrote:
Hi Saurabh,

On Mon, Mar 10, 2014 at 12:27 PM, Saurabh Palande <sa...@gmail.com> wrote:
> Hi Pratik,
>
> Thank you,
>
> I have followed steps as ,
>
> 1. Install ERPNext and change to erpnext directory: i have installed erpnext
> at :-- /home/indictrans/erpnext/erpnext then cd .. now I am at
> /home/indictrans/erpnext
>
> 2. create sites directory: created sites directory at :--
> /home/indictrans/erpnext/sites
>
> 3. Add sites_dir to conf.py : added sites_dir to conf file at:--
> /home/indictrans/erpnext/erpnext/conf.py
>
> 4. Move the existing site to sites directory : mkdir -p sites/test_erp/
> then mv /home/indictrans/erpnext/erpnext/public sites/test_erp/public
>
> 5. make site_config.json : edit sites/test_erp/site_config.json but got
> error saying Error: no "edit" mailcap rules found for type
> "application/json", so I have create it using VIM command and added the
> mentioned content as it is.
>

Sorry, it can be confused with the Autotools make, changed the word to write.

> 6. Then moved to path /home/indictrans/erpnext/erpnext and executed
> ./lib/wnf.py --install test2 -- test_erp for new setup but stuck with error
> wnf.py: error: unrecognized arguments: -- site_name

it was a typo, should be "--site site_name"
>
>


Thanks,
--
Pratik
erpnext

--
Note:

If you are posting an issue,
1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note
---
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAG8U0EkRBPkhFyUkhp54%2Bd-OYu0MmqZSHv%2BmpcnhQSiA0VnWyg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande



--
S.S.Palande

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP9utQKSyRJa_5QtDk1BeZ%3DGfBxbzu-sNVmBfy65RRttyA%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.
9
Hi Saurabh.

What is the db_name value in site_config.json? It seems to have some characters that memcache dislikes.

-Anand.


On Mon, Mar 10, 2014 at 2:52 PM, Saurabh Palande <sa…@gmail.com> wrote:

Hi Pratik,

I have used write sites/test_erp/site_config.json but getting error saying write: sites/test_erp/site_config.json is not logged in
so again I create it using vim sites/test_erp/site_config.json.

Then I run ./lib/wnf.py --install test --site test_erp command but getting following error,
Trace-back is:
ga...@gangadhar-System-Product-Name:/home/erpnext/erpnext$ ./lib/wnf.py --install test4 --site test_erp
MySQL root password:
Created user test
Created database test
Granted privileges to user test and database test
Starting database import...
Imported from database lib/webnotes/../conf/Framework.sql
Installing app...
Traceback (most recent call last):
File "./lib/wnf.py", line 803, in <module>
main()
File "./lib/wnf.py", line 23, in main
run(fn, parsed_args)
File "./lib/wnf.py", line 41, in run
out = globals().get(fn)(*args.get(fn), **args)
File "./lib/wnf.py", line 34, in new_fn
return fn(*args, **new_kwargs)</div><div>  File &quot;./lib/wnf.py&quot;, line 224, in install</div><div>    inst.install(db_name, source_sql=source_sql, verbose=verbose, force=force, admin_password=admin_password)</div>
File "lib/webnotes/install_lib/install.py", line 88, in install
self.install_app(verbose=verbose)
File "lib/webnotes/install_lib/install.py", line 104, in install_app
sync_for("lib", force=True, sync_everything=True, verbose=verbose)
File "lib/webnotes/model/sync.py", line 20, in sync_for
return walk_and_sync(get_path(folder), force, sync_everything, verbose=verbose)
File "lib/webnotes/model/sync.py", line 45, in walk_and_sync
if import_file(module_name, doctype, name, force=force) and verbose:
File "lib/webnotes/modules/import_file.py", line 30, in import_file
ret = import_file_by_path(path, force)
File "lib/webnotes/modules/import_file.py", line 51, in import_file_by_path
import_doclist(doclist)
File "lib/webnotes/modules/import_file.py", line 101, in import_doclist
new_bean.insert()
File "lib/webnotes/model/bean.py", line 260, in insert
return self.save()
File "lib/webnotes/model/bean.py", line 297, in save
self.prepare_for_save(&quot;save&quot;)</div><div>  File &quot;lib/webnotes/model/bean.py&quot;, line 197, in prepare_for_save</div><div>    self.update_timestamps_and_docstatus()</div><div>  File &quot;lib/webnotes/model/bean.py&quot;, line 179, in update_timestamps_and_docstatus</div>
ts = now()
File "lib/webnotes/utils/__init__.py", line 206, in now
return now_datetime().strftime('%Y-%m-%d %H:%M:%S')
File "lib/webnotes/utils/__init__.py", line 179, in now_datetime
return convert_utc_to_user_timezone(datetime.utcnow())
File "lib/webnotes/utils/__init__.py", line 196, in convert_utc_to_user_timezone
return utcnow.astimezone(timezone(get_user_time_zone()))
File "lib/webnotes/utils/__init__.py", line 183, in get_user_time_zone
webnotes.local.user_time_zone = webnotes.cache().get_value("time_zone")
File "lib/webnotes/memc.py", line 20, in get_value
val = self.get(self.n(key))
File "/usr/local/lib/python2.7/dist-packages/memcache.py", line 898, in get
return self._get('get', key)
File "/usr/local/lib/python2.7/dist-packages/memcache.py", line 847, in _get
self.check_key(key)
File "/usr/local/lib/python2.7/dist-packages/memcache.py", line 1062, in check_key
"Control characters not allowed")
memcache.MemcachedKeyCharacterError: Control characters not allowed





On Mon, Mar 10, 2014 at 12:58 PM, Pratik Vyas <pd...@gmail.com> wrote:
Hi Saurabh,

On Mon, Mar 10, 2014 at 12:27 PM, Saurabh Palande <sa...@gmail.com> wrote:
> Hi Pratik,
>
> Thank you,
>
> I have followed steps as ,
>
> 1. Install ERPNext and change to erpnext directory: i have installed erpnext
> at :-- /home/indictrans/erpnext/erpnext then cd .. now I am at
> /home/indictrans/erpnext
>
> 2. create sites directory: created sites directory at :--
> /home/indictrans/erpnext/sites
>
> 3. Add sites_dir to conf.py : added sites_dir to conf file at:--
> /home/indictrans/erpnext/erpnext/conf.py
>
> 4. Move the existing site to sites directory : mkdir -p sites/test_erp/
> then mv /home/indictrans/erpnext/erpnext/public sites/test_erp/public
>
> 5. make site_config.json : edit sites/test_erp/site_config.json but got
> error saying Error: no "edit" mailcap rules found for type
> "application/json", so I have create it using VIM command and added the
> mentioned content as it is.
>

Sorry, it can be confused with the Autotools make, changed the word to write.

> 6. Then moved to path /home/indictrans/erpnext/erpnext and executed
> ./lib/wnf.py --install test2 -- test_erp for new setup but stuck with error
> wnf.py: error: unrecognized arguments: -- site_name

it was a typo, should be "--site site_name"
>
>


Thanks,
--
Pratik
erpnext

--
Note:

If you are posting an issue,
1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note
---
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAG8U0EkRBPkhFyUkhp54%2Bd-OYu0MmqZSHv%2BmpcnhQSiA0VnWyg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande

–

Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP9CMiQKCQdyEb%3DG8mjA3THPcGkUX97RdD1rjmG4Zq2PxQ%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAAQzbF2hif9NE00jpEWwKbBFHhHaa8Z-tgG5LhGX1xnUE4ecrw%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.
10
Hi Anand,

Thank You. Its working fine now. I have one more doubt how I can enable or disable particular tenant account in ERPNext?

Regards,


On Mon, Mar 10, 2014 at 10:29 PM, Anand Doshi <an...@erpnext.com> wrote:
Hi Saurabh.

What is the db_name value in site_config.json? It seems to have some characters that memcache dislikes.

-Anand.


On Mon, Mar 10, 2014 at 2:52 PM, Saurabh Palande <sa…@gmail.com> wrote:

Hi Pratik,

I have used write sites/test_erp/site_config.json but getting error saying write: sites/test_erp/site_config.json is not logged in
so again I create it using vim sites/test_erp/site_config.json.

Then I run ./lib/wnf.py --install test --site test_erp command but getting following error,
Trace-back is:
ga...@gangadhar-System-Product-Name:/home/erpnext/erpnext$ ./lib/wnf.py --install test4 --site test_erp
MySQL root password:
Created user test
Created database test
Granted privileges to user test and database test
Starting database import...
Imported from database lib/webnotes/../conf/Framework.sql
Installing app...
Traceback (most recent call last):
File "./lib/wnf.py", line 803, in <module>
main()
File "./lib/wnf.py", line 23, in main
run(fn, parsed_args)
File "./lib/wnf.py", line 41, in run
out = globals().get(fn)(*args.get(fn), **args)
File "./lib/wnf.py", line 34, in new_fn
return fn(*args, **new_kwargs)</div><div>  File &quot;./lib/wnf.py&quot;, line 224, in install</div><div>    inst.install(db_name, source_sql=source_sql, verbose=verbose, force=force, admin_password=admin_password)</div>
File "lib/webnotes/install_lib/install.py", line 88, in install
self.install_app(verbose=verbose)
File "lib/webnotes/install_lib/install.py", line 104, in install_app
sync_for("lib", force=True, sync_everything=True, verbose=verbose)
File "lib/webnotes/model/sync.py", line 20, in sync_for
return walk_and_sync(get_path(folder), force, sync_everything, verbose=verbose)
File "lib/webnotes/model/sync.py", line 45, in walk_and_sync
if import_file(module_name, doctype, name, force=force) and verbose:
File "lib/webnotes/modules/import_file.py", line 30, in import_file
ret = import_file_by_path(path, force)
File "lib/webnotes/modules/import_file.py", line 51, in import_file_by_path
import_doclist(doclist)
File "lib/webnotes/modules/import_file.py", line 101, in import_doclist
new_bean.insert()
File "lib/webnotes/model/bean.py", line 260, in insert
return self.save()
File "lib/webnotes/model/bean.py", line 297, in save
self.prepare_for_save(&quot;save&quot;)</div><div>  File &quot;lib/webnotes/model/bean.py&quot;, line 197, in prepare_for_save</div><div>    self.update_timestamps_and_docstatus()</div><div>  File &quot;lib/webnotes/model/bean.py&quot;, line 179, in update_timestamps_and_docstatus</div>
ts = now()
File "lib/webnotes/utils/__init__.py", line 206, in now
return now_datetime().strftime('%Y-%m-%d %H:%M:%S')
File "lib/webnotes/utils/__init__.py", line 179, in now_datetime
return convert_utc_to_user_timezone(datetime.utcnow())
File "lib/webnotes/utils/__init__.py", line 196, in convert_utc_to_user_timezone
return utcnow.astimezone(timezone(get_user_time_zone()))
File "lib/webnotes/utils/__init__.py", line 183, in get_user_time_zone
webnotes.local.user_time_zone = webnotes.cache().get_value("time_zone")
File "lib/webnotes/memc.py", line 20, in get_value
val = self.get(self.n(key))
File "/usr/local/lib/python2.7/dist-packages/memcache.py", line 898, in get
return self._get('get', key)
File "/usr/local/lib/python2.7/dist-packages/memcache.py", line 847, in _get
self.check_key(key)
File "/usr/local/lib/python2.7/dist-packages/memcache.py", line 1062, in check_key
"Control characters not allowed")
memcache.MemcachedKeyCharacterError: Control characters not allowed





On Mon, Mar 10, 2014 at 12:58 PM, Pratik Vyas <pd...@gmail.com> wrote:
Hi Saurabh,

On Mon, Mar 10, 2014 at 12:27 PM, Saurabh Palande <sa...@gmail.com> wrote:
> Hi Pratik,
>
> Thank you,
>
> I have followed steps as ,
>
> 1. Install ERPNext and change to erpnext directory: i have installed erpnext
> at :-- /home/indictrans/erpnext/erpnext then cd .. now I am at
> /home/indictrans/erpnext
>
> 2. create sites directory: created sites directory at :--
> /home/indictrans/erpnext/sites
>
> 3. Add sites_dir to conf.py : added sites_dir to conf file at:--
> /home/indictrans/erpnext/erpnext/conf.py
>
> 4. Move the existing site to sites directory : mkdir -p sites/test_erp/
> then mv /home/indictrans/erpnext/erpnext/public sites/test_erp/public
>
> 5. make site_config.json : edit sites/test_erp/site_config.json but got
> error saying Error: no "edit" mailcap rules found for type
> "application/json", so I have create it using VIM command and added the
> mentioned content as it is.
>

Sorry, it can be confused with the Autotools make, changed the word to write.

> 6. Then moved to path /home/indictrans/erpnext/erpnext and executed
> ./lib/wnf.py --install test2 -- test_erp for new setup but stuck with error
> wnf.py: error: unrecognized arguments: -- site_name

it was a typo, should be "--site site_name"
>
>


Thanks,
--
Pratik
erpnext

--
Note:

If you are posting an issue,
1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note
---
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAG8U0EkRBPkhFyUkhp54%2Bd-OYu0MmqZSHv%2BmpcnhQSiA0VnWyg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande

–

Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP9CMiQKCQdyEb%3DG8mjA3THPcGkUX97RdD1rjmG4Zq2PxQ%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

–


Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAAQzbF2hif9NE00jpEWwKbBFHhHaa8Z-tgG5LhGX1xnUE4ecrw%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP___5WHzavJcE91suKd_mDqLoch0nRO003geo7YB4Gv1Q%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.
11
Hi,

How I can enable or disable particular tenant account?

Regards,


On Wed, Mar 12, 2014 at 5:03 PM, Saurabh Palande <sa...@gmail.com> wrote:
Hi Anand,

Thank You. Its working fine now. I have one more doubt how I can enable or disable particular tenant account in ERPNext?

Regards,


On Mon, Mar 10, 2014 at 10:29 PM, Anand Doshi <an...@erpnext.com> wrote:
Hi Saurabh.

What is the db_name value in site_config.json? It seems to have some characters that memcache dislikes.

-Anand.


On Mon, Mar 10, 2014 at 2:52 PM, Saurabh Palande <sa…@gmail.com> wrote:

Hi Pratik,

I have used write sites/test_erp/site_config.json but getting error saying write: sites/test_erp/site_config.json is not logged in
so again I create it using vim sites/test_erp/site_config.json.

Then I run ./lib/wnf.py --install test --site test_erp command but getting following error,
Trace-back is:
ga...@gangadhar-System-Product-Name:/home/erpnext/erpnext$ ./lib/wnf.py --install test4 --site test_erp
MySQL root password:
Created user test
Created database test
Granted privileges to user test and database test
Starting database import...
Imported from database lib/webnotes/../conf/Framework.sql
Installing app...
Traceback (most recent call last):
File "./lib/wnf.py", line 803, in <module>
main()
File "./lib/wnf.py", line 23, in main
run(fn, parsed_args)
File "./lib/wnf.py", line 41, in run
out = globals().get(fn)(*args.get(fn), **args)
File "./lib/wnf.py", line 34, in new_fn
return fn(*args, **new_kwargs)</div><div>  File &quot;./lib/wnf.py&quot;, line 224, in install</div><div>    inst.install(db_name, source_sql=source_sql, verbose=verbose, force=force, admin_password=admin_password)</div>
File "lib/webnotes/install_lib/install.py", line 88, in install
self.install_app(verbose=verbose)
File "lib/webnotes/install_lib/install.py", line 104, in install_app
sync_for("lib", force=True, sync_everything=True, verbose=verbose)
File "lib/webnotes/model/sync.py", line 20, in sync_for
return walk_and_sync(get_path(folder), force, sync_everything, verbose=verbose)
File "lib/webnotes/model/sync.py", line 45, in walk_and_sync
if import_file(module_name, doctype, name, force=force) and verbose:
File "lib/webnotes/modules/import_file.py", line 30, in import_file
ret = import_file_by_path(path, force)
File "lib/webnotes/modules/import_file.py", line 51, in import_file_by_path
import_doclist(doclist)
File "lib/webnotes/modules/import_file.py", line 101, in import_doclist
new_bean.insert()
File "lib/webnotes/model/bean.py", line 260, in insert
return self.save()
File "lib/webnotes/model/bean.py", line 297, in save
self.prepare_for_save(&quot;save&quot;)</div><div>  File &quot;lib/webnotes/model/bean.py&quot;, line 197, in prepare_for_save</div><div>    self.update_timestamps_and_docstatus()</div><div>  File &quot;lib/webnotes/model/bean.py&quot;, line 179, in update_timestamps_and_docstatus</div>
ts = now()
File "lib/webnotes/utils/__init__.py", line 206, in now
return now_datetime().strftime('%Y-%m-%d %H:%M:%S')
File "lib/webnotes/utils/__init__.py", line 179, in now_datetime
return convert_utc_to_user_timezone(datetime.utcnow())
File "lib/webnotes/utils/__init__.py", line 196, in convert_utc_to_user_timezone
return utcnow.astimezone(timezone(get_user_time_zone()))
File "lib/webnotes/utils/__init__.py", line 183, in get_user_time_zone
webnotes.local.user_time_zone = webnotes.cache().get_value("time_zone")
File "lib/webnotes/memc.py", line 20, in get_value
val = self.get(self.n(key))
File "/usr/local/lib/python2.7/dist-packages/memcache.py", line 898, in get
return self._get('get', key)
File "/usr/local/lib/python2.7/dist-packages/memcache.py", line 847, in _get
self.check_key(key)
File "/usr/local/lib/python2.7/dist-packages/memcache.py", line 1062, in check_key
"Control characters not allowed")
memcache.MemcachedKeyCharacterError: Control characters not allowed





On Mon, Mar 10, 2014 at 12:58 PM, Pratik Vyas <pd...@gmail.com> wrote:
Hi Saurabh,

On Mon, Mar 10, 2014 at 12:27 PM, Saurabh Palande <sa...@gmail.com> wrote:
> Hi Pratik,
>
> Thank you,
>
> I have followed steps as ,
>
> 1. Install ERPNext and change to erpnext directory: i have installed erpnext
> at :-- /home/indictrans/erpnext/erpnext then cd .. now I am at
> /home/indictrans/erpnext
>
> 2. create sites directory: created sites directory at :--
> /home/indictrans/erpnext/sites
>
> 3. Add sites_dir to conf.py : added sites_dir to conf file at:--
> /home/indictrans/erpnext/erpnext/conf.py
>
> 4. Move the existing site to sites directory : mkdir -p sites/test_erp/
> then mv /home/indictrans/erpnext/erpnext/public sites/test_erp/public
>
> 5. make site_config.json : edit sites/test_erp/site_config.json but got
> error saying Error: no "edit" mailcap rules found for type
> "application/json", so I have create it using VIM command and added the
> mentioned content as it is.
>

Sorry, it can be confused with the Autotools make, changed the word to write.

> 6. Then moved to path /home/indictrans/erpnext/erpnext and executed
> ./lib/wnf.py --install test2 -- test_erp for new setup but stuck with error
> wnf.py: error: unrecognized arguments: -- site_name

it was a typo, should be "--site site_name"
>
>


Thanks,
--
Pratik
erpnext

--
Note:

If you are posting an issue,
1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note
---
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAG8U0EkRBPkhFyUkhp54%2Bd-OYu0MmqZSHv%2BmpcnhQSiA0VnWyg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande

–

Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP9CMiQKCQdyEb%3DG8mjA3THPcGkUX97RdD1rjmG4Zq2PxQ%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

–


Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAAQzbF2hif9NE00jpEWwKbBFHhHaa8Z-tgG5LhGX1xnUE4ecrw%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande



--
S.S.Palande

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP_TjJhirA3OhXCobXbW%3DTGM%3Dzju%2BzUJDDAAE8ehfR7YmA%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.
12

Just remove it from the sites directory.

sent from phone

On 13 Mar 2014 21:32, "Saurabh Palande" <sa...@gmail.com> wrote:
Hi,

How I can enable or disable particular tenant account?

Regards,


On Wed, Mar 12, 2014 at 5:03 PM, Saurabh Palande <sa…@gmail.com> wrote:

Hi Anand,

Thank You. Its working fine now. I have one more doubt how I can enable or disable particular tenant account in ERPNext?

Regards,


On Mon, Mar 10, 2014 at 10:29 PM, Anand Doshi <an...@erpnext.com> wrote:
Hi Saurabh.

What is the db_name value in site_config.json? It seems to have some characters that memcache dislikes.

-Anand.


On Mon, Mar 10, 2014 at 2:52 PM, Saurabh Palande <sa…@gmail.com> wrote:

Hi Pratik,

I have used write sites/test_erp/site_config.json but getting error saying write: sites/test_erp/site_config.json is not logged in
so again I create it using vim sites/test_erp/site_config.json.

Then I run ./lib/wnf.py --install test --site test_erp command but getting following error,
Trace-back is:
ga...@gangadhar-System-Product-Name:/home/erpnext/erpnext$ ./lib/wnf.py --install test4 --site test_erp
MySQL root password:
Created user test
Created database test
Granted privileges to user test and database test
Starting database import...
Imported from database lib/webnotes/../conf/Framework.sql
Installing app...
Traceback (most recent call last):
File "./lib/wnf.py", line 803, in <module>
main()
File "./lib/wnf.py", line 23, in main
run(fn, parsed_args)
File "./lib/wnf.py", line 41, in run
out = globals().get(fn)(*args.get(fn), **args)
File "./lib/wnf.py", line 34, in new_fn
return fn(*args, **new_kwargs)</div><div>  File &quot;./lib/wnf.py&quot;, line 224, in install</div><div>    inst.install(db_name, source_sql=source_sql, verbose=verbose, force=force, admin_password=admin_password)</div>
File "lib/webnotes/install_lib/install.py", line 88, in install
self.install_app(verbose=verbose)
File "lib/webnotes/install_lib/install.py", line 104, in install_app
sync_for("lib", force=True, sync_everything=True, verbose=verbose)
File "lib/webnotes/model/sync.py", line 20, in sync_for
return walk_and_sync(get_path(folder), force, sync_everything, verbose=verbose)
File "lib/webnotes/model/sync.py", line 45, in walk_and_sync
if import_file(module_name, doctype, name, force=force) and verbose:
File "lib/webnotes/modules/import_file.py", line 30, in import_file
ret = import_file_by_path(path, force)
File "lib/webnotes/modules/import_file.py", line 51, in import_file_by_path
import_doclist(doclist)
File "lib/webnotes/modules/import_file.py", line 101, in import_doclist
new_bean.insert()
File "lib/webnotes/model/bean.py", line 260, in insert
return self.save()
File "lib/webnotes/model/bean.py", line 297, in save
self.prepare_for_save(&quot;save&quot;)</div><div>  File &quot;lib/webnotes/model/bean.py&quot;, line 197, in prepare_for_save</div><div>    self.update_timestamps_and_docstatus()</div><div>  File &quot;lib/webnotes/model/bean.py&quot;, line 179, in update_timestamps_and_docstatus</div>
ts = now()
File "lib/webnotes/utils/__init__.py", line 206, in now
return now_datetime().strftime('%Y-%m-%d %H:%M:%S')
File "lib/webnotes/utils/__init__.py", line 179, in now_datetime
return convert_utc_to_user_timezone(datetime.utcnow())
File "lib/webnotes/utils/__init__.py", line 196, in convert_utc_to_user_timezone
return utcnow.astimezone(timezone(get_user_time_zone()))
File "lib/webnotes/utils/__init__.py", line 183, in get_user_time_zone
webnotes.local.user_time_zone = webnotes.cache().get_value("time_zone")
File "lib/webnotes/memc.py", line 20, in get_value
val = self.get(self.n(key))
File "/usr/local/lib/python2.7/dist-packages/memcache.py", line 898, in get
return self._get('get', key)
File "/usr/local/lib/python2.7/dist-packages/memcache.py", line 847, in _get
self.check_key(key)
File "/usr/local/lib/python2.7/dist-packages/memcache.py", line 1062, in check_key
"Control characters not allowed")
memcache.MemcachedKeyCharacterError: Control characters not allowed





On Mon, Mar 10, 2014 at 12:58 PM, Pratik Vyas <pd...@gmail.com> wrote:
Hi Saurabh,

On Mon, Mar 10, 2014 at 12:27 PM, Saurabh Palande <sa...@gmail.com> wrote:
> Hi Pratik,
>
> Thank you,
>
> I have followed steps as ,
>
> 1. Install ERPNext and change to erpnext directory: i have installed erpnext
> at :-- /home/indictrans/erpnext/erpnext then cd .. now I am at
> /home/indictrans/erpnext
>
> 2. create sites directory: created sites directory at :--
> /home/indictrans/erpnext/sites
>
> 3. Add sites_dir to conf.py : added sites_dir to conf file at:--
> /home/indictrans/erpnext/erpnext/conf.py
>
> 4. Move the existing site to sites directory : mkdir -p sites/test_erp/
> then mv /home/indictrans/erpnext/erpnext/public sites/test_erp/public
>
> 5. make site_config.json : edit sites/test_erp/site_config.json but got
> error saying Error: no "edit" mailcap rules found for type
> "application/json", so I have create it using VIM command and added the
> mentioned content as it is.
>

Sorry, it can be confused with the Autotools make, changed the word to write.

> 6. Then moved to path /home/indictrans/erpnext/erpnext and executed
> ./lib/wnf.py --install test2 -- test_erp for new setup but stuck with error
> wnf.py: error: unrecognized arguments: -- site_name

it was a typo, should be "--site site_name"
>
>


Thanks,
--
Pratik
erpnext

--
Note:

If you are posting an issue,
1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note
---
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAG8U0EkRBPkhFyUkhp54%2Bd-OYu0MmqZSHv%2BmpcnhQSiA0VnWyg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande

–

Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP9CMiQKCQdyEb%3DG8mjA3THPcGkUX97RdD1rjmG4Zq2PxQ%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

–


Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAAQzbF2hif9NE00jpEWwKbBFHhHaa8Z-tgG5LhGX1xnUE4ecrw%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande



--
S.S.Palande

–

Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP_TjJhirA3OhXCobXbW%3DTGM%3Dzju%2BzUJDDAAE8ehfR7YmA%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.