assign
levels to form fields (one-many) - Customize forms page
assign
roles to form levels (many-many) - Permissions page
assign
document stages to form levels in roles (many-many) - Permissions
page
restrict
profiles in each form level in each role - Permissions page
Instead
can we please have it as below?
assign roles
to users (many-many) - Profile page
assign
levels to form fields (one-many) - Customize forms page
assign form
levels to roles(many-many)
- Permissions page
assign
document stages to form levels in roles (many-many) - Permissions page
restrict
profiles in each form level in each role - Permissions page
Only
step 3 changes. The functionality does not change just the usability does.
The
changes required for this would be
The
form in the permissions page where the drop down menu will have rolesinstead
of documents/ forms and instead of "adding roles" we shall
be adding "forms" to one particular role.
For
each form added to a single role there can be a drop down menu alongside with
all the preconfigured levels available for that form such that you can choose
all or some levels for that form in that role.
After
form levels have been assigned to the role, we could use check boxes/ radio
buttons alongside each level to choose document stages to be assigned.
We
could have the match fields drop down alongside the above check boxes/ radio
buttons.
Basically
the above first 3 points will make the Permissions page look like the
"Role permissions" page that is opened when we click on a role in the
profile page. Don't know if this is workable or not but let me
know if something along these lines is possible.
As
before, I find the assigning of roles and document stages to forms tough. Would
much prefer assigning partial forms to roles…
Had promised refactoring of the Permissions page - will fix this in the upcoming release (with cost of goods sold). By our current estimates this will take at least 3 weeks. I know we are pushing back, but we are also doing a lot of other changes that are coming on the way.
Will make sure that the permissions table is filterable either by role or form!
Also a good idea to link the permissions page directly from the Profile page. Will do that too.
assign
levels to form fields (one-many) - Customize forms page
assign
roles to form levels (many-many) - Permissions page
assign
document stages to form levels in roles (many-many) - Permissions
page
restrict
profiles in each form level in each role - Permissions page
Instead
can we please have it as below?
assign roles
to users (many-many) - Profile page
assign
levels to form fields (one-many) - Customize forms page
assign form
levels to roles(many-many)
- Permissions page
assign
document stages to form levels in roles (many-many) - Permissions page
restrict
profiles in each form level in each role - Permissions page
Only
step 3 changes. The functionality does not change just the usability does.
The
changes required for this would be
The
form in the permissions page where the drop down menu will have rolesinstead
of documents/ forms and instead of "adding roles" we shall
be adding "forms" to one particular role.
For
each form added to a single role there can be a drop down menu alongside with
all the preconfigured levels available for that form such that you can choose
all or some levels for that form in that role.
After
form levels have been assigned to the role, we could use check boxes/ radio
buttons alongside each level to choose document stages to be assigned.
We
could have the match fields drop down alongside the above check boxes/ radio
buttons.
Basically
the above first 3 points will make the Permissions page look like the
"Role permissions" page that is opened when we click on a role in the
profile page. Don't know if this is workable or not but let me
know if something along these lines is possible.
As
before, I find the assigning of roles and document stages to forms tough. Would
much prefer assigning partial forms to roles…
Have tried getting used to the other way but just cant get comfy about it.
So far am just using defaults and there is much customisation needed.
Regards,
Sonal
On Tuesday, October 30, 2012 1:38:23 PM UTC+5:30, Sonal wrote:
Hi,
From
what I understand ERPNext allows us to:
assign roles
to users (many-many) - Profile page
assign
levels to form fields (one-many) - Customize forms page
assign
roles to form levels (many-many) - Permissions page
assign
document stages to form levels in roles (many-many) - Permissions
page
restrict
profiles in each form level in each role - Permissions page
Instead
can we please have it as below?
assign roles
to users (many-many) - Profile page
assign
levels to form fields (one-many) - Customize forms page
assign form
levels to roles(many-many)
- Permissions page
assign
document stages to form levels in roles (many-many) - Permissions page
restrict
profiles in each form level in each role - Permissions page
Only
step 3 changes. The functionality does not change just the usability does.
The
changes required for this would be
The
form in the permissions page where the drop down menu will have rolesinstead
of documents/ forms and instead of "adding roles" we shall
be adding "forms" to one particular role.
For
each form added to a single role there can be a drop down menu alongside with
all the preconfigured levels available for that form such that you can choose
all or some levels for that form in that role.
After
form levels have been assigned to the role, we could use check boxes/ radio
buttons alongside each level to choose document stages to be assigned.
We
could have the match fields drop down alongside the above check boxes/ radio
buttons.
Basically
the above first 3 points will make the Permissions page look like the
"Role permissions" page that is opened when we click on a role in the
profile page. Don't know if this is workable or not but let me
know if something along these lines is possible.
As
before, I find the assigning of roles and document stages to forms tough. Would
much prefer assigning partial forms to roles…
I would like to know how can I limit Roles from viewing all transactions in Version 4.
For example:
I would like to limit ALL Role in TODO to view only those todos where they are creator or in assigned by and would not like them to view other todo list items.
I am kind of getting confused with the new Permission manager.
On Tuesday, October 30, 2012 7:19:30 PM UTC+5:30, Sonal Ramnathkar wrote:
Hi Rushabh,
no problem about the time, thanks for doing this.
Have tried getting used to the other way but just cant get comfy about it.
So far am just using defaults and there is much customisation needed.
Regards,
Sonal
On Tuesday, October 30, 2012 1:38:23 PM UTC+5:30, Sonal wrote:
Hi,
From
what I understand ERPNext allows us to:
assign roles
to users (many-many) - Profile page
assign
levels to form fields (one-many) - Customize forms page
assign
roles to form levels (many-many) - Permissions page
assign
document stages to form levels in roles (many-many) - Permissions
page
restrict
profiles in each form level in each role - Permissions page
Instead
can we please have it as below?
assign roles
to users (many-many) - Profile page
assign
levels to form fields (one-many) - Customize forms page
assign form
levels to roles(many-many)
- Permissions page
assign
document stages to form levels in roles (many-many) - Permissions page
restrict
profiles in each form level in each role - Permissions page
Only
step 3 changes. The functionality does not change just the usability does.
The
changes required for this would be
The
form in the permissions page where the drop down menu will have rolesinstead
of documents/ forms and instead of "adding roles" we shall
be adding "forms" to one particular role.
For
each form added to a single role there can be a drop down menu alongside with
all the preconfigured levels available for that form such that you can choose
all or some levels for that form in that role.
After
form levels have been assigned to the role, we could use check boxes/ radio
buttons alongside each level to choose document stages to be assigned.
We
could have the match fields drop down alongside the above check boxes/ radio
buttons.
Basically
the above first 3 points will make the Permissions page look like the
"Role permissions" page that is opened when we click on a role in the
profile page. Don't know if this is workable or not but let me
know if something along these lines is possible.
As
before, I find the assigning of roles and document stages to forms tough. Would
much prefer assigning partial forms to roles…
Thanks
& regards,
Sonal
–
You received this message because you are subscribed to the Google Groups "ERPNext User's Forum" group.
I would like to know how can I limit Roles from viewing all transactions in Version 4.
For example:
I would like to limit ALL Role in TODO to view only those todos where they are creator or in assigned by and would not like them to view other todo list items.
I am kind of getting confused with the new Permission manager.
On Tuesday, October 30, 2012 7:19:30 PM UTC+5:30, Sonal Ramnathkar wrote:
Hi Rushabh,
no problem about the time, thanks for doing this.
Have tried getting used to the other way but just cant get comfy about it.
So far am just using defaults and there is much customisation needed.
Regards,
Sonal
On Tuesday, October 30, 2012 1:38:23 PM UTC+5:30, Sonal wrote:
Hi,
From
what I understand ERPNext allows us to:
assign roles
to users (many-many) - Profile page
assign
levels to form fields (one-many) - Customize forms page
assign
roles to form levels (many-many) - Permissions page
assign
document stages to form levels in roles (many-many) - Permissions
page
restrict
profiles in each form level in each role - Permissions page
Instead
can we please have it as below?
assign roles
to users (many-many) - Profile page
assign
levels to form fields (one-many) - Customize forms page
assign form
levels to roles(many-many)
- Permissions page
assign
document stages to form levels in roles (many-many) - Permissions page
restrict
profiles in each form level in each role - Permissions page
Only
step 3 changes. The functionality does not change just the usability does.
The
changes required for this would be
The
form in the permissions page where the drop down menu will have rolesinstead
of documents/ forms and instead of "adding roles" we shall
be adding "forms" to one particular role.
For
each form added to a single role there can be a drop down menu alongside with
all the preconfigured levels available for that form such that you can choose
all or some levels for that form in that role.
After
form levels have been assigned to the role, we could use check boxes/ radio
buttons alongside each level to choose document stages to be assigned.
We
could have the match fields drop down alongside the above check boxes/ radio
buttons.
Basically
the above first 3 points will make the Permissions page look like the
"Role permissions" page that is opened when we click on a role in the
profile page. Don't know if this is workable or not but let me
know if something along these lines is possible.
As
before, I find the assigning of roles and document stages to forms tough. Would
much prefer assigning partial forms to roles…
Thanks
& regards,
Sonal
–
You received this message because you are subscribed to the Google Groups “ERPNext User’s Forum” group.
I would like to know how can I limit Roles from viewing all transactions in Version 4.
For example:
I would like to limit ALL Role in TODO to view only those todos where they are creator or in assigned by and would not like them to view other todo list items.
I am kind of getting confused with the new Permission manager.
On Tuesday, October 30, 2012 7:19:30 PM UTC+5:30, Sonal Ramnathkar wrote:
Hi Rushabh,
no problem about the time, thanks for doing this.
Have tried getting used to the other way but just cant get comfy about it.
So far am just using defaults and there is much customisation needed.
Regards,
Sonal
On Tuesday, October 30, 2012 1:38:23 PM UTC+5:30, Sonal wrote:
Hi,
From
what I understand ERPNext allows us to:
assign roles
to users (many-many) - Profile page
assign
levels to form fields (one-many) - Customize forms page
assign
roles to form levels (many-many) - Permissions page
assign
document stages to form levels in roles (many-many) - Permissions
page
restrict
profiles in each form level in each role - Permissions page
Instead
can we please have it as below?
assign roles
to users (many-many) - Profile page
assign
levels to form fields (one-many) - Customize forms page
assign form
levels to roles(many-many)
- Permissions page
assign
document stages to form levels in roles (many-many) - Permissions page
restrict
profiles in each form level in each role - Permissions page
Only
step 3 changes. The functionality does not change just the usability does.
The
changes required for this would be
The
form in the permissions page where the drop down menu will have rolesinstead
of documents/ forms and instead of "adding roles" we shall
be adding "forms" to one particular role.
For
each form added to a single role there can be a drop down menu alongside with
all the preconfigured levels available for that form such that you can choose
all or some levels for that form in that role.
After
form levels have been assigned to the role, we could use check boxes/ radio
buttons alongside each level to choose document stages to be assigned.
We
could have the match fields drop down alongside the above check boxes/ radio
buttons.
Basically
the above first 3 points will make the Permissions page look like the
"Role permissions" page that is opened when we click on a role in the
profile page. Don't know if this is workable or not but let me
know if something along these lines is possible.
As
before, I find the assigning of roles and document stages to forms tough. Would
much prefer assigning partial forms to roles…
Thanks
& regards,
Sonal
–
You received this message because you are subscribed to the Google Groups “ERPNext User’s Forum” group.
It is just not limited to the Todo but I was pointing towards a larger issue. In the earlier permission manager we had the ability to restrict users by Creator or any other link field. Now the problem is that the earlier restrictions are not possible, isn't it a step backwards.
I mean, maybe I am missing something, how could I limit a user from seeing only those Sales Orders which are created by them or how could I limit a ROLE from editing only those transactions which are created by them only for all other transactions they cannot edit them.
These are small requirements but I know they take a lot of coding effort and losing that kind of restriction is kind of sad.
By the way, the new permission manager is much more robust but I guess it still lacks the punch since it is very difficult to link some of the inter-links. Like how to ensure a role if linked to a customer sees those customers and only their transactions (like Quote, SO, DN, SI). I know we can add the default values but I still feel that, though that is a good work-around it is not still not the best and intuitive method.
I hope all the above are already answered by the permission manager and I sincerely hope that its only me who has failed to figure out the way.
On Tuesday, June 17, 2014 1:14:14 PM UTC+5:30, Rushabh Mehta wrote:
Aditya
This seems to have gone through the cracks - we will fix it.
I would like to know how can I limit Roles from viewing all transactions in Version 4.
For example:
I would like to limit ALL Role in TODO to view only those todos where they are creator or in assigned by and would not like them to view other todo list items.
I am kind of getting confused with the new Permission manager.
On Tuesday, October 30, 2012 7:19:30 PM UTC+5:30, Sonal Ramnathkar wrote:
Hi Rushabh,
no problem about the time, thanks for doing this.
Have tried getting used to the other way but just cant get comfy about it.
So far am just using defaults and there is much customisation needed.
Regards,
Sonal
On Tuesday, October 30, 2012 1:38:23 PM UTC+5:30, Sonal wrote:
Hi,
From
what I understand ERPNext allows us to:
assign roles
to users (many-many) - Profile page
assign
levels to form fields (one-many) - Customize forms page
assign
roles to form levels (many-many) - Permissions page
assign
document stages to form levels in roles (many-many) - Permissions
page
restrict
profiles in each form level in each role - Permissions page
Instead
can we please have it as below?
assign roles
to users (many-many) - Profile page
assign
levels to form fields (one-many) - Customize forms page
assign form
levels to roles(many-many)
- Permissions page
assign
document stages to form levels in roles (many-many) - Permissions page
restrict
profiles in each form level in each role - Permissions page
Only
step 3 changes. The functionality does not change just the usability does.
The
changes required for this would be
The
form in the permissions page where the drop down menu will have rolesinstead
of documents/ forms and instead of "adding roles" we shall
be adding "forms" to one particular role.
For
each form added to a single role there can be a drop down menu alongside with
all the preconfigured levels available for that form such that you can choose
all or some levels for that form in that role.
After
form levels have been assigned to the role, we could use check boxes/ radio
buttons alongside each level to choose document stages to be assigned.
We
could have the match fields drop down alongside the above check boxes/ radio
buttons.
Basically
the above first 3 points will make the Permissions page look like the
"Role permissions" page that is opened when we click on a role in the
profile page. Don't know if this is workable or not but let me
know if something along these lines is possible.
As
before, I find the assigning of roles and document stages to forms tough. Would
much prefer assigning partial forms to roles…
Thanks
& regards,
Sonal
–
You received this message because you are subscribed to the Google Groups “ERPNext User’s Forum” group.
I just checked by logging into a test user and found out that I guess it is hard coded. This is exactly what I am talking about that hard coding would remove the flexibility. Now what if some1 wants to give rights for viewing all todo, maybe a class teacher or prof working in a education institute.
I mean, you are making an awesome product not just for me or this small community but for a larger audience.
On Tuesday, June 17, 2014 1:35:04 PM UTC+5:30, Rushabh Mehta wrote:
Just checked with Anand - To Do permission is fixed by code. Only system manager can see everyone's To Do.
On 17-Jun-2014, at 1:14 pm, Rushabh Mehta <rm...@gmail.com> wrote:
Aditya
This seems to have gone through the cracks - we will fix it.
I would like to know how can I limit Roles from viewing all transactions in Version 4.
For example:
I would like to limit ALL Role in TODO to view only those todos where they are creator or in assigned by and would not like them to view other todo list items.
I am kind of getting confused with the new Permission manager.
On Tuesday, October 30, 2012 7:19:30 PM UTC+5:30, Sonal Ramnathkar wrote:
Hi Rushabh,
no problem about the time, thanks for doing this.
Have tried getting used to the other way but just cant get comfy about it.
So far am just using defaults and there is much customisation needed.
Regards,
Sonal
On Tuesday, October 30, 2012 1:38:23 PM UTC+5:30, Sonal wrote:
Hi,
From
what I understand ERPNext allows us to:
assign roles
to users (many-many) - Profile page
assign
levels to form fields (one-many) - Customize forms page
assign
roles to form levels (many-many) - Permissions page
assign
document stages to form levels in roles (many-many) - Permissions
page
restrict
profiles in each form level in each role - Permissions page
Instead
can we please have it as below?
assign roles
to users (many-many) - Profile page
assign
levels to form fields (one-many) - Customize forms page
assign form
levels to roles(many-many)
- Permissions page
assign
document stages to form levels in roles (many-many) - Permissions page
restrict
profiles in each form level in each role - Permissions page
Only
step 3 changes. The functionality does not change just the usability does.
The
changes required for this would be
The
form in the permissions page where the drop down menu will have rolesinstead
of documents/ forms and instead of "adding roles" we shall
be adding "forms" to one particular role.
For
each form added to a single role there can be a drop down menu alongside with
all the preconfigured levels available for that form such that you can choose
all or some levels for that form in that role.
After
form levels have been assigned to the role, we could use check boxes/ radio
buttons alongside each level to choose document stages to be assigned.
We
could have the match fields drop down alongside the above check boxes/ radio
buttons.
Basically
the above first 3 points will make the Permissions page look like the
"Role permissions" page that is opened when we click on a role in the
profile page. Don't know if this is workable or not but let me
know if something along these lines is possible.
As
before, I find the assigning of roles and document stages to forms tough. Would
much prefer assigning partial forms to roles…
Thanks
& regards,
Sonal
–
You received this message because you are subscribed to the Google Groups “ERPNext User’s Forum” group.
You can create a custom field of type Link (User) with fieldname "owner" and apply user permissions for that field. This will automatically restrict by owner.
It is just not limited to the Todo but I was pointing towards a larger issue. In the earlier permission manager we had the ability to restrict users by Creator or any other link field. Now the problem is that the earlier restrictions are not possible, isn't it a step backwards.
I mean, maybe I am missing something, how could I limit a user from seeing only those Sales Orders which are created by them or how could I limit a ROLE from editing only those transactions which are created by them only for all other transactions they cannot edit them.
These are small requirements but I know they take a lot of coding effort and losing that kind of restriction is kind of sad.
By the way, the new permission manager is much more robust but I guess it still lacks the punch since it is very difficult to link some of the inter-links. Like how to ensure a role if linked to a customer sees those customers and only their transactions (like Quote, SO, DN, SI). I know we can add the default values but I still feel that, though that is a good work-around it is not still not the best and intuitive method.
I hope all the above are already answered by the permission manager and I sincerely hope that its only me who has failed to figure out the way.
On Tuesday, June 17, 2014 1:14:14 PM UTC+5:30, Rushabh Mehta wrote:
Aditya
This seems to have gone through the cracks - we will fix it.
I would like to know how can I limit Roles from viewing all transactions in Version 4.
For example:
I would like to limit ALL Role in TODO to view only those todos where they are creator or in assigned by and would not like them to view other todo list items.
I am kind of getting confused with the new Permission manager.
On Tuesday, October 30, 2012 7:19:30 PM UTC+5:30, Sonal Ramnathkar wrote:
Hi Rushabh,
no problem about the time, thanks for doing this.
Have tried getting used to the other way but just cant get comfy about it.
So far am just using defaults and there is much customisation needed.
Regards,
Sonal
On Tuesday, October 30, 2012 1:38:23 PM UTC+5:30, Sonal wrote:
Hi,
From what I understand ERPNext allows us to:
assign roles to users (many-many) - Profile page
assign levels to form fields (one-many) - Customize forms page
assign roles to form levels (many-many) - Permissions page
assign document stages to form levels in roles (many-many) - Permissions page
restrict profiles in each form level in each role - Permissions page
Instead can we please have it as below?
assign roles to users (many-many) - Profile page
assign levels to form fields (one-many) - Customize forms page
assign form levels to roles(many-many) - Permissions page
assign document stages to form levels in roles (many-many) - Permissions page
restrict profiles in each form level in each role - Permissions page
Only step 3 changes. The functionality does not change just the usability does.
The changes required for this would be
The form in the permissions page where the drop down menu will have rolesinstead of documents/ forms and instead of "adding roles" we shall be adding "forms" to one particular role.
For each form added to a single role there can be a drop down menu alongside with all the preconfigured levels available for that form such that you can choose all or some levels for that form in that role.
After form levels have been assigned to the role, we could use check boxes/ radio buttons alongside each level to choose document stages to be assigned.
We could have the match fields drop down alongside the above check boxes/ radio buttons.
Basically the above first 3 points will make the Permissions page look like the "Role permissions" page that is opened when we click on a role in the profile page. Don't know if this is workable or not but let me know if something along these lines is possible.
As before, I find the assigning of roles and document stages to forms tough. Would much prefer assigning partial forms to roles…