Update issue (cgi)

1
Hello All,
we have run following commands in app and lib folder

sudo git add .
sudo git commit -a -m "to update"

and then in project folder

cd lib && git fetch origin && git checkout 1310 && cd .. 
cd app && git fetch origin && git checkout 1310 && cd .. 

then I checked the branch of app and lib , it was set to 1310
 
lib/wnf.py --update origin 1310

when I logged in and open the application, all customization (module labels, doctype labels in list,button etc)  was not there.

Is this the correct procedure to update cgi version?

Thanks and Regards,
Gangadhar kadam

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
2
Hi, the branch 1310, not suffer updates, all updates like improved UI and others are available in branch WSGI.



2013/11/13 gangadhar kadam <em…@gmail.com>

Hello All,
we have run following commands in app and lib folder

sudo git add .
sudo git commit -a -m "to update"

and then in project folder

cd lib && git fetch origin && git checkout 1310 && cd ..
cd app && git fetch origin && git checkout 1310 && cd ..

then I checked the branch of app and lib , it was set to 1310
lib/wnf.py --update origin 1310

when I logged in and open the application, all customization (module labels, doctype labels in list,button etc) was not there.

Is this the correct procedure to update cgi version?

Thanks and Regards,
Gangadhar kadam

–

Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




--

Maxwell Morais
Tecnologia da Informação
+55 11 3931-1412 Ramal 31

www.realizemodulados.com.br

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
3
Hello Rushabh Sir,

    Have I missed any step during updates?
  
   Please suggest a solution.
    
Regards,
Gangadhar kadam
    

On Wednesday, 13 November 2013 13:39:33 UTC+5:30, gangadhar kadam wrote:
Hello All,
we have run following commands in app and lib folder

sudo git add .
sudo git commit -a -m "to update"

and then in project folder

cd lib && git fetch origin && git checkout 1310 && cd .. 
cd app && git fetch origin && git checkout 1310 && cd .. 

then I checked the branch of app and lib , it was set to 1310
 
lib/wnf.py --update origin 1310

when I logged in and open the application, all customization (module labels, doctype labels in list,button etc)  was not there.

Is this the correct procedure to update cgi version?

Thanks and Regards,
Gangadhar kadam

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
4
If you are 1310 you can still stay on cgi branch. Maybe you had updated earlier and that is why the system is broken. Please check your git log



On Thursday, November 14, 2013 4:36:26 PM UTC+5:30, gangadhar kadam wrote:
Hello Rushabh Sir,

    Have I missed any step during updates?
  
   Please suggest a solution.
    
Regards,
Gangadhar kadam
    

On Wednesday, 13 November 2013 13:39:33 UTC+5:30, gangadhar kadam wrote:
Hello All,
we have run following commands in app and lib folder

sudo git add .
sudo git commit -a -m "to update"

and then in project folder

cd lib && git fetch origin && git checkout 1310 && cd .. 
cd app && git fetch origin && git checkout 1310 && cd .. 

then I checked the branch of app and lib , it was set to 1310
 
lib/wnf.py --update origin 1310

when I logged in and open the application, all customization (module labels, doctype labels in list,button etc)  was not there.

Is this the correct procedure to update cgi version?

Thanks and Regards,
Gangadhar kadam

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
5
We're experiencing a similar problem here, we try to update from a master from Sept. 16th using this method: https://github.com/webnotes/erpnext/wiki/Migrating-your-erpnext-instance-to-wsgi

and after the --build step it chokes and this is the error we get:

ro...@domain:/var/www/erpnext# ./lib/wnf.py --build
Setting up lang files for hr...
Extracting / updating translatable strings...
Writing translations...
Traceback (most recent call last):
  File "./lib/wnf.py", line 803, in <module>
    main()
  File "./lib/wnf.py", line 23, in main
    run(fn, parsed_args)
  File "./lib/wnf.py", line 43, in run
    out = globals().get(fn)(**args)
  File "./lib/wnf.py", line 34, in new_fn
    return fn(*args, **new_kwargs)
  File "./lib/wnf.py", line 348, in build
    webnotes.build.bundle(False)
  File "lib/webnotes/build.py", line 20, in bundle
    check_lang()
  File "lib/webnotes/build.py", line 52, in check_lang
    update_translations()
  File "lib/webnotes/translate.py", line 86, in update_translations
    import_messages(lang, filename)
  File "lib/webnotes/translate.py", line 311, in import_messages
    for (basepath, folders, files) in os.walk('.'):
  File "/usr/lib/python2.7/os.py", line 294, in walk
    for x in walk(new_path, topdown, onerror, followlinks):
  File "/usr/lib/python2.7/os.py", line 294, in walk
    for x in walk(new_path, topdown, onerror, followlinks):
  File "/usr/lib/python2.7/os.py", line 284, in walk
    if isdir(join(top, name)):
  File "/usr/lib/python2.7/posixpath.py", line 71, in join
    path += '/' + b
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 21: ordinal                                                          not in range(128)

Am Mittwoch, 13. November 2013 09:09:33 UTC+1 schrieb gangadhar kadam:
Hello All,
we have run following commands in app and lib folder

sudo git add .
sudo git commit -a -m "to update"

and then in project folder

cd lib && git fetch origin && git checkout 1310 && cd .. 
cd app && git fetch origin && git checkout 1310 && cd .. 

then I checked the branch of app and lib , it was set to 1310
 
lib/wnf.py --update origin 1310

when I logged in and open the application, all customization (module labels, doctype labels in list,button etc)  was not there.

Is this the correct procedure to update cgi version?

Thanks and Regards,
Gangadhar kadam

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
6
Hi Amin,

I think that in your erpnext directory, there is a file with non ascii name. Please get rid of it if you find it. It could very well be in your files directory.


On Tue, Dec 17, 2013 at 6:33 PM, Amin Zayani <za...@gmail.com> wrote:
We're experiencing a similar problem here, we try to update from a master from Sept. 16th using this method: https://github.com/webnotes/erpnext/wiki/Migrating-your-erpnext-instance-to-wsgi

and after the --build step it chokes and this is the error we get:

ro...@domain:/var/www/erpnext# ./lib/wnf.py --build
Setting up lang files for hr...
Extracting / updating translatable strings...
Writing translations...
Traceback (most recent call last):
File "./lib/wnf.py", line 803, in <module>
main()
File "./lib/wnf.py", line 23, in main
run(fn, parsed_args)
File "./lib/wnf.py", line 43, in run
out = globals().get(fn)(**args)
File "./lib/wnf.py", line 34, in new_fn
return fn(*args, **new_kwargs)
File "./lib/wnf.py", line 348, in build
webnotes.build.bundle(False)
File "lib/webnotes/build.py", line 20, in bundle
check_lang()
File "lib/webnotes/build.py", line 52, in check_lang
update_translations()
File "lib/webnotes/translate.py", line 86, in update_translations
import_messages(lang, filename)
File "lib/webnotes/translate.py", line 311, in import_messages
for (basepath, folders, files) in os.walk('.'):
File "/usr/lib/python2.7/os.py", line 294, in walk
for x in walk(new_path, topdown, onerror, followlinks):
File "/usr/lib/python2.7/os.py", line 294, in walk
for x in walk(new_path, topdown, onerror, followlinks):
File "/usr/lib/python2.7/os.py", line 284, in walk
if isdir(join(top, name)):
File "/usr/lib/python2.7/posixpath.py", line 71, in join
path += '/' + b
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 21: ordinal not in range(128)

Am Mittwoch, 13. November 2013 09:09:33 UTC+1 schrieb gangadhar kadam:
Hello All,
we have run following commands in app and lib folder

sudo git add .
sudo git commit -a -m "to update"

and then in project folder

cd lib && git fetch origin && git checkout 1310 && cd ..
cd app && git fetch origin && git checkout 1310 && cd ..

then I checked the branch of app and lib , it was set to 1310
lib/wnf.py --update origin 1310

when I logged in and open the application, all customization (module labels, doctype labels in list,button etc) was not there.

Is this the correct procedure to update cgi version?

Thanks and Regards,
Gangadhar kadam

–

Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




--
Pratik
erpnext
7

Thanks for the suggestion. We ran a script over the erpnext folders and found one file in erpnext/public/files that I think was uploaded with a support ticket.  Renamed the file and --build worked. However, the server no longer responds when we restart the machine. 

- j

 
Hi Amin,

I think that in your erpnext directory, there is a file with non ascii name. Please get rid of it if you find it. It could very well be in your files directory.


On Tue, Dec 17, 2013 at 6:33 PM, Amin Zayani <za...@gmail.com> wrote:
We're experiencing a similar problem here, we try to update from a master from Sept. 16th using this method: https://github.com/webnotes/erpnext/wiki/Migrating-your-erpnext-instance-to-wsgi

and after the --build step it chokes and this is the error we get:

ro...@domain:/var/www/erpnext# ./lib/wnf.py --build
Setting up lang files for hr...
Extracting / updating translatable strings...
Writing translations...
Traceback (most recent call last):
  File "./lib/wnf.py", line 803, in <module>
    main()
  File "./lib/wnf.py", line 23, in main
    run(fn, parsed_args)
  File "./lib/wnf.py", line 43, in run
    out = globals().get(fn)(**args)
  File "./lib/wnf.py", line 34, in new_fn
    return fn(*args, **new_kwargs)
  File "./lib/wnf.py", line 348, in build
    webnotes.build.bundle(False)
  File "lib/webnotes/build.py", line 20, in bundle
    check_lang()
  File "lib/webnotes/build.py", line 52, in check_lang
    update_translations()
  File "lib/webnotes/translate.py", line 86, in update_translations
    import_messages(lang, filename)
  File "lib/webnotes/translate.py", line 311, in import_messages
    for (basepath, folders, files) in os.walk('.'):
  File "/usr/lib/python2.7/os.py", line 294, in walk
    for x in walk(new_path, topdown, onerror, followlinks):
  File "/usr/lib/python2.7/os.py", line 294, in walk
    for x in walk(new_path, topdown, onerror, followlinks):
  File "/usr/lib/python2.7/os.py", line 284, in walk
    if isdir(join(top, name)):
  File "/usr/lib/python2.7/posixpath.py", line 71, in join
    path += '/' + b
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 21: ordinal                                                          not in range(128)

Am Mittwoch, 13. November 2013 09:09:33 UTC+1 schrieb gangadhar kadam:
Hello All,
we have run following commands in app and lib folder

sudo git add .
sudo git commit -a -m "to update"

and then in project folder

cd lib && git fetch origin && git checkout 1310 && cd .. 
cd app && git fetch origin && git checkout 1310 && cd .. 

then I checked the branch of app and lib , it was set to 1310
 
lib/wnf.py --update origin 1310

when I logged in and open the application, all customization (module labels, doctype labels in list,button etc)  was not there.

Is this the correct procedure to update cgi version?

Thanks and Regards,
Gangadhar kadam

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




--
Pratik
erpnext

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
8
Hi Jonathan,

Alas, python 2+ has some issues with non-ascii filenames, which is solved in python 3+

After restarting, did you restart mysql, apache and memcached?


Also, which branch is your installation on?

-Anand.


On Wed, Dec 18, 2013 at 5:59 PM, Jonathan <ir…@gmail.com> wrote:


Thanks for the suggestion. We ran a script over the erpnext folders and found one file in erpnext/public/files that I think was uploaded with a support ticket. Renamed the file and --build worked. However, the server no longer responds when we restart the machine.


- j

Hi Amin,

I think that in your erpnext directory, there is a file with non ascii name. Please get rid of it if you find it. It could very well be in your files directory.


On Tue, Dec 17, 2013 at 6:33 PM, Amin Zayani <za...@gmail.com> wrote:
We're experiencing a similar problem here, we try to update from a master from Sept. 16th using this method: https://github.com/webnotes/erpnext/wiki/Migrating-your-erpnext-instance-to-wsgi


and after the --build step it chokes and this is the error we get:

ro…@domain:/var/www/erpnext# ./lib/wnf.py --build
Setting up lang files for hr…
Extracting / updating translatable strings…

Writing translations...
Traceback (most recent call last):
File "./lib/wnf.py", line 803, in <module>
main()
File "./lib/wnf.py", line 23, in main
run(fn, parsed_args)
File "./lib/wnf.py", line 43, in run
out = globals().get(fn)(**args)
File "./lib/wnf.py", line 34, in new_fn
return fn(*args, **new_kwargs)
File "./lib/wnf.py", line 348, in build
webnotes.build.bundle(False)
File "lib/webnotes/build.py", line 20, in bundle
check_lang()
File "lib/webnotes/build.py", line 52, in check_lang
update_translations()
File "lib/webnotes/translate.py", line 86, in update_translations
import_messages(lang, filename)
File "lib/webnotes/translate.py", line 311, in import_messages
for (basepath, folders, files) in os.walk('.'):
File "/usr/lib/python2.7/os.py", line 294, in walk
for x in walk(new_path, topdown, onerror, followlinks):
File "/usr/lib/python2.7/os.py", line 294, in walk
for x in walk(new_path, topdown, onerror, followlinks):
File "/usr/lib/python2.7/os.py", line 284, in walk
if isdir(join(top, name)):
File "/usr/lib/python2.7/posixpath.py", line 71, in join
path += '/' + b
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 21: ordinal not in range(128)

Am Mittwoch, 13. November 2013 09:09:33 UTC+1 schrieb gangadhar kadam:

Hello All,
we have run following commands in app and lib folder

sudo git add .
sudo git commit -a -m "to update"

and then in project folder

cd lib && git fetch origin && git checkout 1310 && cd ..
cd app && git fetch origin && git checkout 1310 && cd ..

then I checked the branch of app and lib , it was set to 1310
lib/wnf.py --update origin 1310

when I logged in and open the application, all customization (module labels, doctype labels in list,button etc) was not there.

Is this the correct procedure to update cgi version?

Thanks and Regards,
Gangadhar kadam

–

Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




--
Pratik
erpnext

–

Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.


–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
9
The installation is on the master branch.  In the past after we restarted the server, ERPNext (mysql and apache) came up by themselves. I am not sure about memcached. Has something changed such that ERPNext must be restarted manually after the server reboots?

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
10
Hi Jonathan,

Starting of MySQL, Apache and Memcached depends on how you have configured your server and is not at all related to ERPNext.

If you are on master branch, you need to use NGINX and not apache. See: https://github.com/webnotes/erpnext/wiki/WSGI-Production-Deployment

Thanks,
Anand.


On Mon, Dec 23, 2013 at 5:40 PM, Jonathan <ir...@gmail.com> wrote:
The installation is on the master branch. In the past after we restarted the server, ERPNext (mysql and apache) came up by themselves. I am not sure about memcached. Has something changed such that ERPNext must be restarted manually after the server reboots?

–

Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.


–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
11
Hi Jonathan,

If you use the production setup instructions, you will be using the supervisor to manage the erpnext server process. If you installed supervisor from the repositories, then supervisor will start at boot and will also start the erpnext gunicorn process.


On Mon, Dec 23, 2013 at 5:40 PM, Jonathan <ir...@gmail.com> wrote:
The installation is on the master branch. In the past after we restarted the server, ERPNext (mysql and apache) came up by themselves. I am not sure about memcached. Has something changed such that ERPNext must be restarted manually after the server reboots?

–

Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.




--
Pratik
erpnext
12
I am attempting to follow the instructions in https://github.com/webnotes/erpnext/wiki/WSGI-Production-Deployment.  

After doing ./lib/wnf.py --pull origin master
followed by ./lib/wnf.py -- latest

I get the errors below.  How do I continue from here?

---------------------------------------------

Traceback (most recent call last):
  File "./lib/wnf.py", line 590, in <module>
    webnotes.connect(site=site)
  File "./lib/wnf.py", line 363, in run
    if with_files:
  File "./lib/wnf.py", line 59, in pull
    def setup_parser():
  File "./lib/wnf.py", line 63, in rebuild
    setup_install(parser)
  File "/var/www/erpnext/lib/webnotes/build.py", line 5, in <module>
    from webnotes.utils.minify import JavascriptMinify
  File "/var/www/erpnext/lib/webnotes/utils/__init__.py", line 7, in <module>
    from webnotes import conf
ImportError: cannot import name conf
Traceback (most recent call last):
  File "./lib/wnf.py", line 12, in <module>
    import webnotes
  File "lib/webnotes/__init__.py", line 10, in <module>
    from werkzeug.local import Local

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
13

Hi Jonathan,

On Thu, Jan 16, 2014 at 5:44 PM, Jonathan ir...@gmail.com wrote:

I am attempting to follow the instructions in
WSGI Production Deployment · webnotes/erpnext Wiki · GitHub.

After doing ./lib/wnf.py --pull origin master
followed by ./lib/wnf.py – latest

I get the errors below. How do I continue from here?

Traceback (most recent call last):
File “./lib/wnf.py”, line 590, in
webnotes.connect(site=site)
File “./lib/wnf.py”, line 363, in run
if with_files:
File “./lib/wnf.py”, line 59, in pull
def setup_parser():
File “./lib/wnf.py”, line 63, in rebuild
setup_install(parser)
File “/var/www/erpnext/lib/webnotes/build.py”, line 5, in
from webnotes.utils.minify import JavascriptMinify
File “/var/www/erpnext/lib/webnotes/utils/init.py”, line 7, in

from webnotes import conf
ImportError: cannot import name conf
Traceback (most recent call last):
File “./lib/wnf.py”, line 12, in
import webnotes
File “lib/webnotes/init.py”, line 10, in
from werkzeug.local import Local

What is the output of pip --version ?

–
Note:

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much
    information as you can. Please see it from the point of view of the person
    receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send
    only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

–
Pratik
erpnext

14
Hi Pratik.

pip 1.2.1 from /usr/local/lib/python2.7/dist-packages/pip-1.2.1-py2.7.egg (python 2.7)

Thanks.

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
15
Hi, 

Was there any further response?

Thanks

- j

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
16

Hi Jonathan,

Sorry, I missed this thread.

On Thu, Jan 16, 2014 at 5:44 PM, Jonathan ir...@gmail.com wrote:

I am attempting to follow the instructions in
WSGI Production Deployment · webnotes/erpnext Wiki · GitHub.

After doing ./lib/wnf.py --pull origin master
followed by ./lib/wnf.py – latest

I get the errors below. How do I continue from here?

Traceback (most recent call last):
File “./lib/wnf.py”, line 590, in
webnotes.connect(site=site)
File “./lib/wnf.py”, line 363, in run
if with_files:
File “./lib/wnf.py”, line 59, in pull
def setup_parser():
File “./lib/wnf.py”, line 63, in rebuild
setup_install(parser)
File “/var/www/erpnext/lib/webnotes/build.py”, line 5, in
from webnotes.utils.minify import JavascriptMinify
File “/var/www/erpnext/lib/webnotes/utils/init.py”, line 7, in

from webnotes import conf
ImportError: cannot import name conf
Traceback (most recent call last):
File “./lib/wnf.py”, line 12, in
import webnotes
File “lib/webnotes/init.py”, line 10, in
from werkzeug.local import Local

It is strange that you get this error, can you try

pip install -r lib/requirements.txt and try again

If it doesn’t work, please post the output of

python2.7 -c "import werkzeug"
which python2.7

–
Note:

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much
    information as you can. Please see it from the point of view of the person
    receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send
    only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

–
Pratik
erpnext

17
The pip install did a few things but was unable to upgrade mysql-python. result of  pip --version did not change.

root@:/var/www/erpnext# pip --version
pip 1.2.1 from /usr/local/lib/python2.7/dist-packages/pip-1.2.1-py2.7.egg (python 2.7)

root@:/var/www/erpnext# python2.7 -c "import werkzeug"
Traceback (most recent call last):
  File "<string>", line 1, in <module>
ImportError: No module named werkzeug

root@:/var/www/erpnext# which python2.7
/usr/bin/python2.7

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
18
Install werkzeug module (pip install werkzeug)

On 23-Jan-2014, at 4:56 PM, Jonathan wrote:

The pip install did a few things but was unable to upgrade mysql-python. result of  pip --version did not change.

root@:/var/www/erpnext# pip --version
pip 1.2.1 from /usr/local/lib/python2.7/dist-packages/pip-1.2.1-py2.7.egg (python 2.7)

root@:/var/www/erpnext# python2.7 -c "import werkzeug"
Traceback (most recent call last):
  File "<string>", line 1, in <module>
ImportError: No module named werkzeug

root@:/var/www/erpnext# which python2.7
/usr/bin/python2.7


–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
1 Like
19
OK, werkzeug is installed, now going back to  

./lib/wnf.py --pull origin master

Traceback (most recent call last):
  File "./lib/wnf.py", line 12, in <module>
    import webnotes
  File "lib/webnotes/__init__.py", line 16, in <module>
    import semantic_version
ImportError: No module named semantic_version


–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
20
Message is very clear, you have to install semantic_version. Please install all dependencies mentioned in  https://github.com/webnotes/wnframework/blob/develop/requirements.txt

On 23-Jan-2014, at 10:48 PM, Jonathan wrote:

OK, werkzeug is installed, now going back to  

./lib/wnf.py --pull origin master

Traceback (most recent call last):
  File "./lib/wnf.py", line 12, in <module>
    import webnotes
  File "lib/webnotes/__init__.py", line 16, in <module>
    import semantic_version
ImportError: No module named semantic_version



–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.